SARONG Automatic Suppository filler - 46605

Unit is in excellent working condition.

Model: SAAS 2

Technical Data

• Output: 5,000 suppositories/h
• 30 lt. heated double-jacketed electric immersion element
• Mac diameter of packaging material reels: 300 mm
• Max film width: 65 mm
• Packaging materials:
• Aluminum
  duplex (ALU/PE)
  triplex (PP/ALU/PE)
  thickness: 70÷100 microns
• Plastic film:
• PVC, PVC/PE, PVC/PVDC/PE and other
  thermoforming materials,
  thickness: 100÷200 microns
• Machine controlled by PLC
• Cooling time: 20 minutes
• Min temperature of cooling air: 5°C
• Power of cooling group: 3600 W
• Pneumatic equipment with 0.3 microns filtered air
• Compressed air consumption:
  aluminum foil: max 30 NL/min
  Plastic film: max. 130 NL/min
• Rated pressure: 6 bar
• Cooling water: 3÷5 L/min
• Nominal installed power (indicative): 10 KW
• Control circuit: 24 V.d.c.
• Standard power supply:
  230/400 V, 3-phases + N + Gnd., 50 Hz
• Other voltages available on request
• Noise level: below the 78 dB (A)
• Dimensions (indicative)
  1860 x 1648 x 2465 height
• Height from floor of strip outfeed: 940 mm
• Approx. Weight:
  SAAS 2 AP: 1210 kg