DOMINO A200 Ink Jet Coder-SOLD - 50500

Technical Specification

Control Panel: Membrane touch button

Cabinet: Stainless Steel (304) designed to IP53(BSEN 60529:1992)

Cabinet  dimensions: 245mm x 475mm x 725mm (9.6” x 18.7” x 28.5”)

Weight: 36kg (79lbs)

Character Control

• Auto repeat • Character width and

• Auto invert/reverse height adjustment

• User defined clock format • Print delay

• Sequential/batch numbering • Product counter

• Inverse reverse and • Barcodes bold characters • Message repeat

Data Input Options

• Serial RS232 • Ethernet, RJ45 Connector

• Rate: 110-38.4k Baud, software configurable

Ink System

Viscosity control: Automatic

Ink bleed control: Automatic on start up

Ink and make-up refill: 825ml (.87qt) cartridge

automatically metered

Peltier: Optional

Print head

Dimensions: 240mm x 41mm x 47mm (9.45” x 1.61” x 1.85”)

Conduit length: 3m (11’8) or 6m (23’6)

Positive air: Optional internal supply

Air dryer: Internal compressor or factory air option

Environment

Temperature range: 5 – 45°C (40 – 112°F) operating

Humidity: 10 – 90% (non-condensing)

Electrical requirements: Single phase, fully auto-ranging 90 – 132V/180 – 264V, 50/60Hz 200VA

Standard Connections

Product detector: 12V 100mA for photocell or

Proximity detector. IP68 6 way socket

Shaft encoder input: Open collector or TTL encoder

12V via IP68 6 way socket

There are (7) ink jets available for bidding. These units were recently removed from production. The ink jets are sold ”as is condition” with no warranty implied. Manuals & spare parts available. Serial numbers, parts list and additional information available upon request.