SOMAT Close-Coupled Waste Pulping System Disposal, Reclaim, and Shredder | Reclaim and Recycle

    Browse our other
    Reclaim and Recycle

    Item Details

    Item Id 165863
    Item #: 165863
    Item: SOMAT Close-Coupled Waste Pulping System Disposal, Reclaim, and Shredder
    Model #: SPC-755HT
    Serial #: 8301-1
    Year Built: 2003
    Location: California
    Price: $17,500.00

    Description

    SOMAT Close-Coupled Pulper Hydra-Extractor.
    Model #SPC-755HT

    Dimensions:
    Total Height: 66” (1677mm)
    Equipment weight: 900 lbs. (408kg)
    Tank Height: 43” (1093mm)
    Operating weight: 1155 lbs. (524kg)
    Length: 67.25”(1709)
    Crated weight: 1275 lbs. (533kg)
    Width: 30” (762mm)
    Crated volume: 167 cu. ft.

    Used: Unit is working and has very little use. Unit has 414 hours on it. Then it has sat for a few years.
    It was dismantled and removed on 07/25/2013.

    It is like a giant garbage disposal, pulverizer, shredder & etc.

    Sells for $52,000.00

    DESCRIPTION:
    Standard SOMAT Model SPC-75S HT high tank, close-coupled pulper and Hydra-Extractor with hinged lid and limit switch, water flushed feed tray, 3 HP recirculating pump, chemical additive pump, valve package, Som-A-Trol control panel with water level control, push button station, and discharge chute with limit switch.

    Benefits:
    As much as 8 to1 (87.5%) volume reduction
    Reduced labor cost
    Better sanitation
    Water conservation
    Improved operator morale
    Reduced silverware loss
    Processes a wide variety of waste

    Operation:
    Food service waste enters the pulping tank via the feed tray where it mixes with water, is processed and made into a slurry. The slurry, consisting of 5% solids and 95% water, is automatically transported through a pipeline to the Hydra-Extractor, where water is removed and the result-ant semi-dry pulp is discharged into a haul-away container.
    The extracted water is recovered and returned to the pulping tank for re-use. Somat equipment provides an economic and efficient answer to cutting the high and ever increasing costs associated with waste handling.

    Technical Specs:
    Pulper: 30” diameter, 39.5” high polished stainless steel tank with water flushed feed tray, hinged lid with limit switch, 3/8” thick stainless steel slurry chamber, 7-1/2 HP TEFC direct drive motor, internal junk box and cutting mechanism, HyPoint cutting mechanism, stainless steel, consists of 1 piece security ring with 3 stationary, replaceable top cutters and impeller with 2 replaceable rotating cutters.

    Hydra-Extractor:
    Rigid stainless steel weldment with stainless steel legs, head assembly with 2 HP TEFC drive motor mounted to a 20:1 gear reducer, 17” long stainless steel discharge chute with limit switch, 3HP TEFC recirculating pump and chemical additive pump. Water extracting mechanism consists of 6” diameter stainless steel screw with nylon brush edge, stainless steel plug cutter and matching 6” diameter reinforced stainless steel screen, automatic rinse system with automatic shutdown timer.

    Valve Package:
    All valves required for proper operation (fresh water, tray flush and drain lines).
    Som-A-Trol (Electrical Control Panel):
    UL approved. Includes all necessary electrical components prewired to a terminal strip; water level control and push button station, in a NEMA 4 stainless steel enclosure.


    Additional Prep Fees May Apply

    Shipping

    Height: 0.00 in
    Width: 0.00 in
    Length: 0.00 in
    Weight: 0.00 lbs
    Prep Fee: $500.00
    Registered Customers can request shipping quotes free of charge. Shipping Quotes take 1-3 Business Days to Process

    charticon This item has  today
    moneyicon Have one to sell?
    Sell
    Need Financing? FinanceLink

    Testimonials

    • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
    • "The strength of their site is how often our machinery comes up on web searches." - John G.
    • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
    • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
    • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
    • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
    • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
    • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.