Enco Vertical Mill, Model # 100-1599 with ACU-RITE Digital Read Out
Enco Vertical Mill, Model # 100-1599 with ACU-RITE Digital Read Out, Model #319-9827 with Extras
New Condition, Mill only have 4 hours on it. Mill was used as a Mill demo. Priced with Digital Read Out. Worth over $9,000.00 with accessories. Contact for Pricing.
ENCO Vertical Mill
Model #100-1599
Knee Milling Machines; Spindle Speed Control: Variable Speed Pulley; Table Length (Inch): 49; Table Width (Inch): 9; Phase: 3; Longitudinal Travel (Inch): 35; Longitudinal Travel (Decimal Inch): 35.0000
Machine Type: Knee Style
Table Length (Inch): 49
Table Width (Inch): 9
Horsepower: 2
X Axis Travel (Decimal Inch): 35"
Y Axis Travel (Decimal Inch): 13.5000"
Minimum Distance Spindle to Table Fract (Inch): 0
Maximum Distance Spindle to Table Fract (Inch): 18
Spindle Taper: R8
Spindle Travel: 5
Ram Travel (Decimal Inch): 14.5000"
Quill Diameter (Decimal Inch): 3.3750
T-Slot Size (Inch): 5/8
Number of t-slots in the table: 3
Knee Travel (Inch): 16
Minimum Spindle RPM: 60
Maximum Spindle RPM: 4200
Power Down Feed: Yes
Number of Feedrates: 3.000
Feedrate for Power Downfeed: 0.0015, 0.003, 0.006
Voltage: 220
Phase: 3
Head Swivel LH Degree: 90.000
Head Swivel RH Degree: 90.000
Head Tilt Back Degree: 45
Head Tilt Forward Degree: 45
Maximum Floor Space Required Depth (Inch): 90
Maximum Floor Space Required Width (Inch): 102
Overall Length (Inch): 71
Overall Depth (Inch): 74
Overall Height (Inch): 85
ACU-RITE Digital Read Out
Model #319-9827
DRO Systems; Machine Compatibility: Milling; Number of Axes: 2; X-Axis Travel (Inch): 35; Y-Axis Travel (Inch): 13; Resolution (mm): 1 to 0.0001 (Linear Axis); Resolution (µm): 5.00
Type: Milling
Number of Axis: 2
Longitudinal Travel: 35
Crosslide Travel Length (Inch): 13
Cross Travel (Inch): 13
Accuracy: ±5µm/M
Manufacturer Part Number: 21V01-1335
Additional Prep Fees May Apply