60 gallon Southbend tilting natural gas stainless steel jacketed steam kettle with a 2 inch tangent draw off, faucet and hinged cover. UL approval. 120 volt
A self-contained, gas fired, fully insulated steam jacketed kettle, ASME Code stamped, National Board Registered, AGA, CGA and NSF certified for operation up to 50 PSI. A double wall interior steam jacket around the lower 2/3 of the kettle. The jacket enclosure contains factory sealed, distilled water.
The kettle interior is type 304 stainless steel. Kettle exterior is fully insulated. The bottom of the kettle is hemispherical design for superior heat circulation. The recessed control panel is located on the front right of the unit, in full view of the operator and easy to use. Standard controls include direct immersion thermostat for operation at a temperature range of 165°F to 275°F (74°C to 135°C) at 50 psi, water sight glass, cooking light, pressure gauge and electronic ignition with ignition indicator light. Safety features include low water shut off with indicator light, pressure switch, pressure relief valve and a 100% safety gas shut off valve.
The kettle pivots on trunnions connected to the tilt mechanism and control consoles. The tilt mechanism allows the kettle to tilt past 90° for complete emptying. The console is drip proof, stainless steel clad and is supported on all welded, 1-5/8” (41 mm) diameter stainless steel legs with flanged feet for securing to the floor.
In excellent condition.
Additional Prep Fees May Apply