Nuaire NU-540-600 Cellgard ES Class II Type A2
**Unit has been tested for basic functionality. All vents, lights and buttons functioning normally. Unit has some minor wear on the exterior... see photos for more information
The LabGard ES Model NU-540 Laminar Flow Biosafety Cabinet (LFBSC) is a bench/table top model, optionally available with a base support stand, for operation as a console model. The LabGard ES model NU-540 utilizes an Energy Saver DC ECM motor optimally determined forward curved fan for each model size/width to maximize both energy efficiency and filter loading capacity. The Energy Saver ECM motor is controlled by the AeromaxTM Control System to nominal airflow setpoints via an integrated solid-state DC motor controller based on feedback algorithm to provide automatic compensation (constant volume control) for both filter loading and line voltage variances. Airflow velocity is monitored by the PresurFlowTM system with a digital pressure sensor.
The Laminar Flow Biosafety Cabinet, (LFBSC) is a product resulting from the development of the laminar flow principle (see Airflow Schematic) and the application of environmental controls as required in the field of biological research or chemical containment. The LFBSC, when used with proper technique, is an effective primary engineering control in obtaining the optimum product quality while reducing the potential for exposure of both product and personnel to airborne biological or particulate chemical agents in low to moderate risk-hazard research and drug preparation or product operations, as prescribed by the Center for Disease Control (CDC) Atlanta, Georgia.
The NU-540 bench LFBSC meets the requirements of a Class II, since the cabinet conforms to the following requirements:
Maintains a minimum inflow velocity of 100 LFPM (.51mps) through the work access opening.
Has HEPA filtered downflow air that is mixed with the inflow air from a common exhaust plenum.
Discharges a percentage of air to the outside atmosphere after HEPA filtration.
Has all biologically contaminated ducts and plenums under negative pressure or surrounded by negative pressure.
Cabinets used for work with minute quantities of non-flammable or explosive volatile toxic chemicals and tracer amounts of radionuclides required as an adjunct to microbiological studies must be exhausted through properly functioning exhaust canopies.
Interior Work Space Dimensions
Height - 29 in
Width - 71 in
Depth - 26 in
Additional Prep Fees May Apply
