Fuji gas flushing & vacuum impulse sealer
new price $43,200.00
220v; 3000watt; single heating elem.; 800mm seal length; 10mm seal width;
Click Link to View Manufacturer’s Information
The LOS-NT/NTW series sealers are long-length sealers capable of creating both vacuum and gas-flush seals. When you want to flush the air inside the bag and reduce the package volume, or when you want to utilize oxygen scavenger to extend product life, you can use the Vacuum Sealing function. When you want to fill the bag with nitrogen gas to prevent oxidation, or with carbon dioxide to create bacteriostatic or insect-repellent effects or to prevent spoilage and mold growth, you can use the Gas-flush Sealing function.
Switch Among 10 Sealing Methods!
The following sealing methods can be combined to create an optimum sealing method for your application. Select a sealing method to meet your needs, including selecting to best suit the characteristics of the packaged material and to obtain your desired packaging finish.
Featuring the ONPUL System, the heating temperature is controlled by directly detecting the heater temperature using a low-profile temperature sensor that comes in contact with the heating element. The initially set sealing condition will not be affected by the work environment or by extended use. Easy-to-Operate Microcomputer Controller The selection and setting of work method and vacuum method, as well as of gas-flush method and its frequency, are all controlled at the microcomputer controller. Simply press the touch panel buttons for the settings. Maximum 10 operation patterns can be stored in the microcomputer.
Tilting the Head Angle
By turning the adjuster knob, the tilt angle of the head can be variably adjusted between 0 and 90 degrees to suit the package content. For example, when packaging powders,tilting down the sealer head will allow the sealing
Additional Prep Fees May Apply