Premier Tech Chronos Bagging Line System:
New & Complete (never assembled or commissioned) state of the art computerized PremierTech Chronos Bagging Line System. This system includes a volumetric Feed Hopper, a 43 ft InFeed Conveyor Belt System, flow regulator and transition chute. The Bagging System includes a Volumetric Hopper and filling system to fill both a small bag and bulk bags. Hot air sealer closing system, (handles 14" to 28" wide bags) . Palletizing System components include an in-line Turner Conveyor, a Horizontal Bag Flattener, and an 8' Gravity Roller Conveyor with an 8' x 4' x 2' Control Integration Panel. Bag conveying system. This state of the art system includes engineering , control integration and software, Project Management and layout with a factory Start-up.
Manual Bagger, (Bulk Tote Filler), and Manual Product Feeding System Includes:
Volumetric Hopper with belt on rollers, (12 yd3/9 m3)
Hopper extension
Adjustable Front Gate with crank
Transition chute
Flow Regulator
Troughed Belt of flat idler Roller conveyor 43”
Transition chute
Manual Bagging System:
Volumetric Feeder with Rubber star scrappers
Upgrade to a stand alone volumetric feeder
Manual filling system
Additional chute and filling spout for small bag
Additional chute and filling spout for bulk bag ( bag supported by forklift )
Closing System
Bag conveying system:
Stand-alone conveyor for standing bags 12’
Upgrade for manual adjustable legs
Motor quick disconnect 15 meter , Upgrade for castor and positioning pins
Stand alone in-line turner
Horizontal bag flattener
Gravity roller conveyor 8’
The Troughed Belt Conveyor and Feed Hopper is stored tarped and inside a covered stored area, the white steel system and control panels have been carefully stored inside a heated warehouse on original shipping pallets.
The entire bagging system can either be configured in a linear configuration or a Bent Configuration, both attached with dimensions.
Electrical drop:
575V/3ph/60hz/40 AMP, WYE CONNECTION WITH COMBINED GROUNDED NEUTRAL (TN-C EARTHING SYSTEM, 4 WIRES (3PH + GND))
120V/1Ph/60Hz/10AMPS
Pneumatic:
15 SCFM @ 90 PSI connection 1/2 NPT – Main pipe of 1’’ minimum
Additional Prep Fees May Apply