Portable High Pressure Steam Boiler In a 40' Shipping Container
Complete boiler room installed in a 40’ shipping container. Includes a 100 HP Cleaver Brooks high pressure steam boiler, 3,450 PPH high pressure steam, capable of burning natural gas, #2 oil or propane, feed tank, feedwater pumps, blowdown separator with aftercooler, water softeners, chemical treatment pumps, stop-check valve, piping, electrical, lights, control panel, and manuals & documentation. Fully pre-piped with flanged connections through the sidewall of the container. Purchase price includes rigging cost to load.
System Connection:
High pressure steam: 4” #300 flange
Condensate return: 3” #150 flange
Natural gas: 2” #150 flange
City water: 1” #150 flange
Electrical supply: 3/4" fnpt galvanized ridgid conduit
Boiler:
Manufacturer: Cleaver Brooks
Model: CB 200-100
Serial: L-76396
Maximum Pressure: 150 PSI
Input: 4,184,000 BTU/HR
Fuel: Natural gas, propane, or #2 fuel oil. Currently set up for propane but can be converted back to natural gas prior to shipment.
Electrical Requirements
Power Supply: 460 V
Amps: 8.5
Phase: 3
Hz: 60
Minimum Circuit Ampacity: 10A
Maximum Rating Circuit Protection: 34A
Blower Motor: 2HP
Feed Tank:
Boiler feedwater tank - approximately 100 gal capacity, heavy gage steel construction, rated for atmospheric pressure @ 250°F. Includes steam sparge tube to pre-heat boiler feedwater.
Pumps:
Boiler feedwater pump A – 22 gpm, 431’ tdh, Grundfos model CR4-120-U-G-A-AUUE coupled to a 5 hp 3450 rpm 208-230/460 volt tefc motor.
Boiler feedwater pump A – 22 gpm, 431’ tdh, Grundfos model CR4-120-U-G-A-AUUE coupled to a 5 hp 3450 rpm 208-230/460 volt tefc motor.
Water Softener Package:
Commercial grade water softener – twin alternating water softer package, 192,000 grain capacity (96,000 grain per tank), Fleck model 9100SXT.
Chemical Treatment Package:
Chemical metering pumps – three (3) – Advantage controls chemical metering pumps.
Mounting shelf – one (1) wall mount shelf for three metering pumps.
Injection quills – three (3) stainless steel chemical injection quills with integral check valves.
Treatment chemical – one (1) partial drum sulfate chemical
Treatment chemical – one (1) partial drum steam header treatment chemical
Treatment chemical – one (1) partial drum sludge conditioner
Safety Devices:
Pressure relief valves: Two (2) ASME section IV pressure relief valves with cast iron drip pan elbows.
Emergency stop: One (1) emergency stop button as required by NFPA 70 and IRI.
Documentation Available: Yes.
Condition: Used
Shipping Information:
Overall Dimensions: 7’-8” wide x 40’ long x 8’-11” tall
Shipping Weight: 30,000 LBS.
* Purchase price includes rigging cost to load. We ship anywhere, please email for a shipping quote.
Additional Prep Fees May Apply
