MACHINE DESCRIPTION
The Schneider HCP Case Packaging System comprised of an automatic,
adjustable, right-hand, inline, product accumulator, horizontal load case former, packer, and sealer; and a Nordson ProBlue Hot-Melt Glue System. The machinery is driven by an Allen-Bradley PLC with NEMA-4 electrics and a Panelview 1000 Message Display Unit. Machinery is Stainless steel construction.
The system described above is designed to handle the packing of your product in the following product sizes, pack patterns and case sizes at the speeds shown:
Product/Container Specifications
Product Type Product Package
Size Dimensions
(in inches)
L x W x D
Pack
Pattern
L x W x D
Container Size
(in inches)
L x W x D
Line
Speed
PPM
Output
Speed
CPM
8-pack Individual pack 1 1/8 x 7 ½ x 5 // Pattern 8 x 1 x 1 // Case size 9 5/8 x 7 7/8 x 5 3/8 // CPM 15
12-pack Individual pack 1 1/8 x 7 ½ x 5 // Pattern 12 x 1 x 1 // Case Size 14 1/8 x 7 7/8 x 5 3/8 // CPM 10
* All flaps meet
Note: On cases with a square cross section, a corner cut or notch is required in one top and bottom flap to aid the erecting of the case. A sketch will be provided to show proper location.
DESCRIPTION OF OPERATION:
The product enters the infeed with the longest dimension parallel to travel. It is collated into the proper pack pattern and loaded into the case. The loaded case is indexed through the machine where the minor and major flaps are folded and hot melt sealed. The finished case is discharged onto the customer’s takeaway conveyor.
Simultaneously during the loading sequence, the machine, using vacuum cups, is automatically selecting a new blank from the magazine, opening and forming it. Other stations within the machine are performing their required functions.
Flat, knocked-down case blanks are manually stacked in a horizontal magazine. An attendant manually loads case blanks in the magazine and must be trained in the machine operation (turning the machine on and off, correcting stoppages, and properly restarting the machine)
Additional Prep Fees May Apply
