INTERFIL IC45-A Semi Auto Clean Centrifuge for Sale

Semi Auto Clean IC45-A Centrifuge
The Interfil IC45-A Centrifuge is a high speed Centrifuge designed for efficient separation of solids from liquids applicable for solids with soft gelatinous properties. The Centrifuge is a continuous uninterrupted operation with auto ejection of solids. Ideal for Biofuel production including cleaning of used Vegetable Oil, Wash Down Bays, Wine and Fruit Juice production, Waste Water Streams WWTP and many other industrial processes. The IC45-A is ideal as a stand-alone system or can be included to compliment an existing system. It is also suitable as a mobile unit due to its light weight and low power consumption.

For applications such as wine production, a nitrogen blanketed system is available as an optional extra.

BENEFITS OF THE INTERFIL IC45-A

Choice of Manual and Fully Automated Self Cleaning
Compact Design
One Pass Separation with Flow Rate 0-4800Lph
High Speed Precision Balanced For Greater Separation
Super Quiet Operation
No Wearable Parts
Automatic Solid Removal
304 Stainless Steel Heavy Duty Bowl (6Ltr Liquid Holding Capacity and 3Ltr Solid Holding Capacity)
4 Point Vibration Isolation Points
Quick and Easy Removal of the Bowl
High G Force 3000G at 3900rpm
Tungsten Carbide Cleaning Tip
Single Phase and 3 Phase Power options suitable to specific Country requirements.

High G force of 3000 Gravities and a processing rate of 4800 Litres per hour allows for optimum separation. The rotating stainless steel bowl is dynamically balanced at 4000rpm for extra smooth operation and direct driven by a heavy duty three phase induction motor with extra duty bearings and heavy sectioned locating flange and housing. The precision spinning bowl is encased by a heavy machined cast aluminium lid and bucket, with powder coating for standard applications and optional chemical resistant and FDA approved coatings for specific applications. The IC-45A is supplied with four isolators for anchoring points for secure location to the ground or a pallet/trolley for mobility around the plant. The system design incorporates four point dampeners for vibration isolation to help prevent an out of balance state. The automatic removal of solids is activated by means of a timer within the cabinet. The timer activates the auto clean function and discharges the solids into a collection bin. The high speed bowl is easily removed with the bowl removal tool supplied with the centrifuge. The bowl having light weight and stainless steel construction makes the removal, if required, easy and safe from accidental damage.

Operation
The Interfil IC45-A Centrifuge works with the use of centrifugal force, allowing separation of solid particles from liquid. The centrifugal force has a maximum 3,000 gravities. The separation of solids is greatly improved when the liquid is exposed longer to the centrifugal force. This can be achieved by simply slowing the supply rate to the centrifuge. Extended retention time enables improved clarity and cleanliness in the end product. The liquid is fed through a 1″ bsp inlet connection located on top of the lid of the centrifuge, entering directly into the high speed rotating bowl where the centrifugal force then throws the heavier particulate solids out to the inner peripheral wall of the rotating bowl, whilst the clean liquid flows up the centre of the bowl and discharges by gravity through a 2″ outlet at the bottom of the Centrifuge. The solids remaining within the bowl are then removed automatically by the self-cleaning device activated via the pre-set timers located in the control cabinet. The flow to the centrifuge continues during the self-cleaning operation as removal of solids consists of seconds only. The rotating force of the bowl forces the gelatinous solids up the tube and discharges to a collection bin, eliminating the requirement for an additional pump.

Indicative Flow Rates
There are several factors that are considered when determining the flow rate through the centrifuge, these include:

Viscosity of the liquid (can be changed by increasing or decreasing the temperature)
The percentage of solids present in the liquidppm-(Recommend less than 5% solids to liquid) Particle size um
Difference in specific gravity with the solid and liquids sg.
If the liquid Sinks or Floats – Bowl and Centrifuge Selection

General Information
Typical Application Solid and Water
Max. Design temp. 80 Degrees Celsius
Centrifugal G-Force 3000G @ 3900 rpm
Dry Weight 150kg
Casing Material of Construction Heavy Duty Cast Alloy
Inlet Size 1” BSP Female Thread
Outlet Size 2” BSP Female Thread
Solid Discharge Port Size ½” BSP Male Thread
Bowl Assembly and Solid Discharge
Effective Bowl Diameter 300mm
Effective Bowl Length 150mm
Bowl Material 304 Stainless Steel
Solid Discharge Tube Material 316 Stainless Steel
Solid Discharge Tube Wear Protection Full Tungsten Carbide
Pneumatic Air Pressure Requirements 80 PSI (550Kpa)

Typical Properties
Hydraulic Capacity 4800 Litres per Hour
Recommended Flow Rate 3600 Litres per Hour
Solid Removal Capacity (1200kg/m3) 180 Litres per Hour
Removal Efficiency @ 5um 99%
Automatic Self Discharge- Solids
Solid Discharge Tube Material 316 Stainless Steel
Solid Discharge Tube Wear Protection Full Tungsten Carbide
Cleaning Device Actuation Horizontal
Pneumatic Air Pressure Requirements 80 PSI (550Kpa)
Solid Discharge Port Size ½” BSP Male Thread

Control Equipment
Electrical Cabinet IP65 Enclosure
Electrical Requirements 1 phase 220V / 60Hz – 240V / 50Hz 10amps
Control Wiring 24Vdc
Solid Discharge Control Omron 24 Hour Timers
Speed Control Allen Bradley VSD – 2.2Kw
Feed Pump Control Contactor/Overload for 1.5Kw Supply Pump
Safety – E-Stop & Lid Tampering Protection Allen Bradley Cat 2 Safety Relay and E-Stop

Drives
Main Motor Size 2.2Kw VFD
Main Motor Data 3 phase 415V – 480V 50Hz / 60Hz
Electrical Cabinet IP65 Enclosure
Electrical Requirements 1 phase 220V / 60Hz – 240V / 50Hz

Product Litres per hour
Wash down bays 1200
Potato starch 3800
Ceramics 3800
Non-destruction digging 3800
Horizontal directional drilling HDD 3800
Food processing 4800
Waste water 4800
Grinding coolant 4800
Gold and silver recovery 600
Grape juice / wine 3800
Rape seed & conola oil 190
Biodiesel 1780
Engine oil and water 1500
Engine oil 300
Vagetable oil and water 1200
Vegetable oil 300

Additional Prep Fees May Apply