CURIOX DropArray HT Washing Station
**Unit was tested as far as we could. Unit need other items for fully test (DA-Bead Microplates). Has slight cosmetic blemishes from normal use. See photos for further details.
The LT-210 MX provides gentle washing, and its 96 and 384 well clampers come equipped with individual magnets under each well to retain magnetic beads during the washing process. The instrument uses the novel wall-less technology of Curiox DropArray Microplates (not included), which are available in 96 and 384 well formats. The instrument employs low velocity liquid exchange that ensures the retention of magnetic beads. Drainage of the wash buffer at the end of plate washing involves the automated tilting of the rinsing chamber, which ensures that the wash buffer is removed from the chamber.
Conceptual Simplicity: Installation and operation are simple and convenient compared with other microplate washers that cater to microplates with wells. Tips are not used for liquid handling, hence parameters such as tip height and flow rates do not need to be optimized. Ease of use: Washing cycles (the number of which can be adjusted) occur automatically following pre-programmed process. Conservation: There is minimal requirement for usage of assay material such as precious beads. Compactness: The LT-210 MX is compact enough to fit on a bench or into a cell culture hood to avoid contamination.
Specifications
Voltage Requirement: 100-220V
Operating Temperature Range: 15-40C
Operating Humidity: < 80%, non-condensing
Plate Type Drop Array DA-Bead Microplates,
96- and 384-formats (not Included)
Additional Prep Fees May Apply
