SSI TC-20 Tubbing Cutter Machine for Sale

SSI Laboratory Tubbing Cutter Machine Model: TC-20

**This unit has been tested to specifications. Need to replace cutting wheels for a new one. Has slight cosmetic blemishes from normal use. See photos for further details.

The Model TC-20 tube cutter assures a zero dead volume connection. Because tubing is held securely in a clamp vise on the vertical swing arm, a square cut is produced when the swing arm is lowered against the abrasive cutting wheel, which produces a finished end. No lubricant or cutting fluid is required.

Cuts 3 common tubing sizes
1/16, 1/8, and 1/4 outside diameter tubing with inside diameters as small as 0.008 can be smooth- cut and dressed without distortion.

Dressing tools
The precision ground dressing tool for 1/16 OD tubing is included and is attached directly to the swing arm so it cannot be misplaced or lost. Simply place the cut tubing end in the tool and rotate the knurled handle to finish both the internal and external diameters of the tubing in one operation. If desired, the dressing tool can be ordered and used separately from the tube cut-off machine. The tool for 1/8 and 1/4 is optional.

Specifications
Cuts 1/16, 1/8, or 1/4 tubing with inside diameter as small as 0.008
Electrically operated bench-top model
Cutter Type: Dry abrasive tool
Dressing Tool: Precision ground and Aligned hard
Handy 1/16 dressing tool (included) on the swing arm removes burrs and reams tubing
Voltage selectable 110120/220240 volts, 5060 Hz.

Additional Prep Fees May Apply