Complete Skid Mounted 30 GPM Oil Drying / Dehydration System
Complete skid mounted 30 gallon per minute oil drying / dehydration system
The package includes the flash vessel, shell and tube heater, condenser, receivers, pumps, controls, instruments, control panel, valves, piping, steel support frame, and complete system documentation. System was designed to remove up to 15% water from a 30 gpm vegetable oil stream but would be suitable for use in many other dehydration applications. The system was designed and constructed in 2014 but used only intermittently since. All equipment is still installed and can be inspected prior to removal. The purchase price includes rigging and removal costs.
Product feed: 3” #150 flange
Product outlet: 3” #150 flange
Recovered water outlet: 1” #150 flange
Thermal fluid supply: 3” #300 flange
Thermal fluid return: 3” #300 flange
Cooling water supply: 2” #150 flange
Cooling water return: 2” #150 flange
Vapor outlet: 2” #150 flange
Nitrogen: 3/4” #3000 fs threaded coupling
Instrument air: 1” #3000 fs threaded coupling
D-100 Flash Vessel – 1,000 gal capacity, cs construction, 48” diam x 96” s-s, 300 psig / fv @ 600°F
D-101 Flash Knock Out Tank – 170 gal capacity, cs construction, 24” diam x 72” s-s, 50 psig / fv @ 450°F
E-120 Raw Oil Feed Heater – 839 sq feet, hairpin style heat exchanger, carbon steel tube side, carbon steel shell side, 16” diam x ??” long shell, ?? - ??” od x ??” long cs tubes, tube side rating: 150 psig / fv @ 500°F, shell side rating: 150 psig / fv @ 300°F
E-121 Condenser – 294 sq feet, 304 ss tube side, cs shell side, ?” diam x ?” long shell, ?? – ??" od x ??” long seamless 304 ss tubes, tube side rating: 150 psig @ 150°F, shell side rating: 50 psig / fv @ 360°F
E-122 Vac Pump Recirc Cooler – 36 sq feet, hairpin style heat exchanger, 304 ss tube side, 304 ss shell side, 4” diam x 147” long shell, 7 – 3/4” od x 312” long 16 gauge 304 tubes, tube side rating: 385 psig / fv @ 450°F, shell side rating: 575 psig / fv @ 450°F
P-110A Oil Feed Pump – 35 gpm @ 70 psid, Viking model HL4197 internal gear pump, 2 hp 1200 rpm 208-230/460 volt explosion proof motor.
P-111 Recovered Water Pump – 5 gpm @ 42 psid, Viking model HL4124B internal gear pump, 1 hp 1770 rpm 208-230/460 volt explosion proof motor.
P-112 Oil Bottoms Pump – 35 gpm @ 140 psid, Viking model LS4127A internal gear pump, 7.5 hp 1770 rpm 208-230/460 volt explosion proof motor.
VP-115 Vacuum Pump – 106 cfm @ 30 in HG, Gardner Denver Nash Elmo model VSB-200 dry screw vacuum pump, 5 hp 3600 rpm 208-230/460 volt explosion proof motor.
Control Valves: Five (5) Masoneilan (Dresser) eccentric rotary plug valves
Flow Transmitters: One (1) Yokagowa Rotamass corriolis mass flow transmitters
Temperature Transmitters: Four (4) Yokagowa YTA-110 series RTD temperature transmitters
Temperature Gauges: Fifteen (15) Ashcroft EI series 5” dial, bimetallic thermometers with thermowells
Pressure Transmitters: Three (3) Foxboro IGP20 relative pressure transmitters
Pressure Gauges: Fourteen (14) Ashcroft type 1009 4-1/2” dial stainless steel pressure gauges
Level Transmitters: Two (2) Yokagowa FLEX80-Y guided wave radar level transmitters
Pressure Relief Valves: Five (5) Consolidated or Mercer pressure relief valves.
Skid mounted instrument panel with power supply, fuses, relays, terminals, din rail, panel channel, and Schneider / Telemecanique distributed I/O modules. Panel also includes Ethernet module for one wire Cat6 connection to HMI.
Yes. All original drawings, engineering calculations, vessel drawings, ASME U-1A data reports, etc.
Like new condition. The system was designed and constructed in 2014 but used very little after commissioning. All equipment is still installed and can be inspected prior to removal.
*Additional Photos Available
Overall Dimensions: 12'W x 31'L x 11'-6"H
Shipping Weight: 48,532 LBS.
*The purchase price includes rigging and removal costs. We ship anywhere, please email for a shipping quote.
Additional Prep Fees May Apply