Invitrogen Corporation Zoom Dual Power Supply for Electrophoresis Model: ZP10001
**This unit has been tested to specifications. Has slight cosmetic blemishes from normal use. No error messages display. See photos for further details.
The high voltage/low current section is ideal for sample fractionation, IPG strips, IEF, and DNA sequencing applications. The low voltage/high current section is for SDS-PAGE, native PAGE, second dimension SDS-PAGE, DNA/RNA electrophoresis, and blotting applications. Four sets of output jacks on each side of the unit allow for multiple apparatus to run simultaneously, offering greater workflow efficiency and higher sample throughput. Microprocessor-controlled programmable power supply capable of running both high voltage/low current and high current/low voltage applications concurrently.Circuit Protection: Open Circuit; Short Circuit; Thermal Protection Over Voltage, Over Current, Overpower. Programs Stored:15 programs, up to 6 steps each.
High voltage/low current and low voltage/high current sides can be used independently and concurrently.
Multiple output jacks allow for the simultaneous running of up to four electrophoresis apparatus on each side of the unit.
Memory stores up to 30 programs (15 programs per side) of up to six steps per program. Step and ramp functions for discrete and gradual changes of electrical parameters
No Load detection alarm system can be disabled to power high voltage applications that require very low current.
Specifications
Type: Dual Power Supply
Current: 0.0110.0 mA, adjustable in 0.01 mA increments
Content And Storage: Store at room temperature.
For Use With (Equipment): Zoom IPG Runner System
Voltage: 1 to 3500V
Power: 0.1 - 35W in 0.1 W steps
Output range: Voltage1250 V; adjustable in 1V steps
Current and Power: 1800 mA, adjustable in 1 mA increments,1200 W in 1 W steps
Power Outlets: 4 pairs of terminals each
Programs Stored: 15 programs, up to 6 steps each.
Duration Limits: 1 to 9999 min in 1 min steps
Voltage Hours: 1 to 65000 V-hr. in 1 V-hr. steps
Operating Modes: Constant voltage, constant current, constant power
Circuit Protection: Open Circuit; Short Circuit; Thermal Protection Over Voltage, Over Current, Overpower
Memory Control: Non-volatile, up to 24 hours. Custom Methods Stored to RAM
Temperature: Ambient 4-40C
Input Power: 110 VAC, 5060 Hz
220 VAC, 5060 Hz
Fuses: One 4A/250V, one extra fuse is provided
Power Consumption: 420 watts at maximum load
Output Range: High Voltage / Low Current Side
13,500 VDC (minimum step size 1 V)
0.0110 mA (minimum step size 0.01 mA)
0.135 W (minimum step size 0.1 W)
Automatic crossover on reaching set limits.
Low Voltage / High Current Side
1250 VDC (minimum step size 1 V)
1800 mA (minimum step size 1 mA)
1200 W (minimum step size 1 W)
Automatic crossover on reaching set limits.
Accuracy: High Voltage / Low Current Side
11,000 VDC : 10 volts
1,0013,500 VDC : 20 volts
Low Voltage / High Current Side
1250 VDC : 2 volts
Duration Limits Time: 19,999 min
Volt-hours: 165,000 volt-hours
Power Outlets: 8 pairs of terminals: 4 high voltage and 4 low voltage
4 sets of electrophoretic systems can be operated under high
voltage and 4 sets under low voltage conditions concurrently
Operating Modes: Constant voltage, constant current, constant power
Circuit Protection: Open Circuit; Short Circuit; Thermal Protection
Over Voltage, Over Current, Over Power
Safety: No Load Detection Enable/Disable
Isolated Floating Ground
Memory Control: Non-volatile, up to 24 hours
Custom Methods Stored to RAM
Memory: 15 programs on high voltage side, 15 programs on low voltage side, up to 6 steps each
Additional Prep Fees May Apply
