Complete Skid Mounted Metha - 366998 For Sale Used
$194,900.00

We'll submit your offer right away and will let you know as soon as the seller responds

Want to speak to the seller?
Call us at 847-854-8577

Did you know?

  • Buy This Now will submit at asking price
    BoE will be in contact within 1 business day.
  • This is NOT a timed auction.
  • BoE highly recommends buyers Contact the Seller to get questions answered prior to placing an offer.

Item Details

Item Id 366998
Item #: 366998
Item: Complete Skid Mounted Methanol Recovery Unit / Flash Evaporator - 4 GPM
Model #: N/A
Serial #: N/A
Year Built: N/A
Location: California
Price: $194,900.00

Description

Complete Skid Mounted 4 GPM Methanol Recovery Unit / Flash Evaporator

Complete skid mounted 4 gallon per minute methanol recovery unit / flash evaporator. The package includes the flash vessel, shell & tube heater, condenser, receivers, pumps, controls, instruments, control panel, valves, piping, steel support frame, and complete system documentation. System was designed to remove up to 20% methanol from a 4 gpm crude glycerin stream but would be suitable for use in many other flash evaporation or solvent recovery applications. The system was designed and constructed in 2014 but used only intermittently since. All equipment is still installed and can be inspected prior to removal. The purchase price includes rigging and removal costs.

System Connection:
Product feed: 2” #150 flange
Product outlet: 2” #150 flange
Recovered methanol outlet: 1” #150 flange
High pressure steam supply: 2” #150 flange
Condensate return: 2” #150 flange
Thermal fluid supply: 2” #300 flange
Thermal fluid return: 2” #300 flange
Cooling water supply: 2” #150 flange
Cooling water return: 2” #150 flange
Chilled water supply: 2” #150 flange
Chilled water return: 2” #150 flange
Vapor outlet: 2” #150 flange
Nitrogen: 3/4” #3000 fs threaded coupling
Instrument air: 1” #3000 fs threaded coupling

Vessels:
D-400 Flash Vessel – 1,250 gal capacity, cs construction, 36” diam x 144” s-s, 50 psig / fv @ 400°F
D-401 Overhead Receiver – 460 gal capacity, cs construction, 28” diam x 81” s-s, 50 psig / fv @ 400°F

Heat Exchangers:
E-420 Feed Heater – 212 sq feet, hairpin style heat exchanger, carbon steel tube side, carbon steel shell side, 8” diam x 236” long shell, 26 – 3/4” od x 480” long seamless cs tubes, tube side rating: 150 psig / fv @ 500°F, shell side rating: 150 psig / fv @ 400°F
E-421 Condenser – 553 sq feet, cs tube side, cs shell side, ?” diam x ?” long shell, ?? – ??" od x ??” long cs tubes, tube side rating: 150 psig / fv @ 300°F, shell side rating: 150 psig @ 150°F
E-422 Vac Pump Recirc Cooler – 127 sq feet cs tube side, cs shell side, 8” diam x 128” long shell, 72 – 5/8" od x 128” long cs tubes, tube side rating: 150 psig @ 150°F, shell side rating: 50 psig / fv @ 360°F
E-423 Product Cooler – 223 sq feet, hairpin style heat exchanger, carbon steel tube side, carbon steel shell side, ?” diam x ??” long shell, ?? – ??” od x ??” long cs tubes, tube side rating: 150 psig @ 150°F, shell side rating: 150 psig @ 300°F

Pumps:
P-410 Feed Pump – 4 gpm @ 130.2’ TDH, Goulds model LF3196 1x1.5-8 centrifugal pump, 1.5 hp 3450 rpm 208-230/460 volt explosion proof motor.
P-412 Recovered Methanol Pump – 5 gpm @ 142.5’ TDH, Goulds model LF3196 1x1.5-8 centrifugal pump, 1 hp 3450 rpm 208-230/460 volt explosion proof motor.
P-413 Bottoms Pump – 4 gpm @ 53.2 psid, Viking model HL4124B internal gear pump, 2 hp 1750 rpm 208-230/460 volt explosion proof motor.
VP-414 Vacuum Pump – 177 cfm @ 30 in HG, Gardner Denver Nash Elmo model VSB-320 dry screw vacuum pump, 10 hp 3600 rpm 208-230/460 volt explosion proof motor.

Instruments:
Control Valves: Seven (7) Masoneilan (Dresser) eccentric rotary plug valves
Automated Ball Valves: Two (2) Triac flanged ball valves with Bray pneumatic actuator and Masoneilan limit switch.
Pressure Regulators: Three (3) Cashco type D pressure reducing regualtors
Flow Transmitters: One (1) Yokagowa Rotamass corriolis mass flow transmitters
Temperature Transmitters: Eight (8) Yokagowa YTA-110 series RTD temperature transmitters
Temperature Gauges: Sixteen (16) Ashcroft EI series 5” dial, bimetallic thermometers with thermowells
Pressure Transmitters: Three (3) Foxboro IGP20 relative pressure transmitters
Pressure Gauges: Seventeen (17) Ashcroft type 1009 4-1/2” dial stainless steel pressure gauges
Level Transmitters: Two (2) Yokagowa FLEX80-Y guided wave radar level transmitters

Safety Devices:
Pressure Relief Valves: Six (6) Consolidated or Mercer pressure relief valves.

Control Panel:
Skid mounted instrument panel with power supply, fuses, relays, terminals, din rail, panel channel, and Schneider / Telemecanique distributed I/O modules. Panel also includes Ethernet module for one wire Cat6 connection to HMI.

Documentation Available:
Yes. All original drawings, engineering calculations, vessel drawings, ASME U-1A data reports, etc.

Condition:
Like new condition. The system was designed and constructed in 2014 but used only intermittently since. All equipment is still installed and can be inspected prior to removal

*Additional Photos Available

Shipping Information:
Overall Dimensions: 12'W x 32'L x 11'-6"H
Shipping Weight: 21,978 LBS.

*The purchase price includes rigging and removal costs. We ship anywhere, please email for a shipping quote.
Additional Prep Fees May Apply

Shipping

Height: 138.00 in
Width: 144.00 in
Length: 384.00 in
Weight: 21978.00 lbs
Prep Fee: N/A
Registered Customers can request shipping quotes free of charge. Shipping Quotes take 1-3 Business Days to Process
Request Shipping Quote
This item has  today
Have one to sell?
Sell
Mark Checkbox to add to your watched categories

Testimonials

  • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
  • "The strength of their site is how often our machinery comes up on web searches." - John G.
  • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
  • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
  • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
  • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
  • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
  • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.