Browse our other Filler - Cappers
2017 Filler Specialties 30 head filler w/10 head capperModel Number: AWFS-3010 Machine Hand: Right hand Conveyor Chain: 3 ¼” wide 820 or 880 tabThis machine is in excellent condition with 30 fill heads and a 10 head capper. It has the optional electric height adjustments for the capper and filler bowl and has 2 sets of change parts. 16.9 oz and 1 liter.Filler & Capper Features- .690 diameter EMV filling valves; stainless steel valve tubes- 1 ½” inlet throttling valve- Line support with 1 ½” flexible inlet- Infeed timing screw - Powered bowl raising & lowering- Powered capper raising & lowering- Rotary cap feeder for 28mm flat caps- Bulk cap hopper elevator - FH-914 capper with bottle neck support & anti-spin hardware- Missing cap detection mounted in cap chute- Downline backlog eyesBulk cap hopper elevator running 28mm caps2017 McBrady HS600 HS Rinser for Bottling line in excellent condition. Wet and air rinse most size and styles of bottles.Model #HS-600 HIGHSPEED BOTTLE Rinser, 10’ OAL, to invert and water rinse your 500ml and 1 Liter bottles at speeds of 200-275 bpm. Please note that the bottles will be wet both inside and out upon discharge of the machineIncluded in the price quoted below are the following features:- Infeed& Discharge Conveyors with their own speed control for fine tuning- 2- Allen Bradley variable frequency drive- AllenBradley electrical components- JamOverload Shock Relays- Allmotors inverter rated duty/wash down- HeavyDuty Construction- ClusterLube for all bearings- Oilimpregnated plastic track- Infeed and Discharge Photo Units- Stainlesssteel catch basins under top motors and reducers- 2- Emergency Stops- HeavyDuty 3 ¼” Rubber Grippers with S.S. #60 Chain- SikoDigital Counter for quick and accurate Gripper size changes- DoorInterlocks- HeavyDuty S.S. Bearings and housings, chains, sprockets, and shafts- Type304 stainless steel and approved plastic construction¬ No change parts, bottle size changes takes less than 3 minutes- Low profile with a cabinet height of only 50" on most applications- Lexan top enclosure for full visibility of infeed and discharge.- Optional Complete Center Enclosure(Interlocked)- Optional Water Pressure Loss Switch- Optional Air Pressure Loss Switch - Optional Powerflex 525 with Ethernet communications card Additional Prep Fees May Apply