AUMA SG07.1 Electric Valve Actuators
*ENVIRONMENTAL
Ambient temperature: -20°F to +140°F (-25°C to +60°C)
Color: AUMA silver-grey similar to RAL 7037
Enclosure protection: NEMA 4
Corrosion protection: KN (standard)
*ELECTRICAL DATA
Mains voltage: 460 Volts AC, 60 Hz, 3-Phase
Motor protection: 3Ph-1 thermal switch 140°C NC, class F insulation
Type of duty: S2 - 15 min.
*MOTOR DATA
Motor designation : SD00-50-4/60
Nominal power (HP) : 1/8
Nominal power (kW) : 0.08
Nominal current (FLA) : 0.6
Starting current (LRA) : 0.9
Current approx. Imax. (RTA) : 0.6
Nominal speed (RPM) : 1680
COS : 0.60
NEC code letter : B
*ACTUATOR FEATURES
SG model: SG 07.1
Valve coupling: Unbored valve shaft coupling
Mechanical position indicator: (11) continuous OPEN-CLOSE
Limit switches: 2 gear train, 8 contacts (2 tandem switches 250VAC/5A) •
Torque switches: 4 wire torque switches (2 single switches 250VAC/5A)
Potentiometer: 5.0 kOhm precision potentiometer
Electronic position transmitter: 4-20mA RWG4020 4-wire
Heater: (22.1) 110V-250V AC/DC self-regulating PTC element: 5-20 W
Set to degrees: 90
Swing angle: 80-110 degrees
Mounting flange: FA07, according to MSS SP-101
Actuator direction to CLOSE: Clockwise
Handwheel: 6.3" aluminum with ball handle (AHR160)
Electrical connection: Actuator plug for mounting AM/AC/SEM
*Actuator Controls:
Enclosure: AM 01.1
Controls: Standard interface board
Input signals: OPEN - STOP - CLOSE
Type of signal: 110 - 125 V AC internal, or external supply
LOCAL operation: Push buttons OPEN, STOP, CLOSE
Selector switch: LOCAL-OFF-REMOTE, 2 levels
Indication lights: OPEN-red, FAULT-yellow, CLOSE-green •
Power supply unit: Transformer, customer output: 115 V AC
Motor controls: Reversing contactors max. 1.5 kW (power class A1)
Motor protection: Thermal switch
Mounting position: Position A
Output signals: OPEN-CLOSE/LOCAL-REMOTE
Version logic: Lights illuminated in mid travel
Electrical connection: Plug/socket, 2 x ¾" NPT; 1 x 1 ¼" NPT with
Integral disconnect switch 3 poles
Fault signal: Torque included in collective fault signal
Heater: Control unit heater internally supplied
Seating CLOSED: Limit switch
Seating OPEN: Limit switch
Self locking LOCAL: With
Self locking REMOTE: With
Interrupt switch: 40A non-fusible disconnect switch
2nd digit: Integral Disconnect Switch with torque by-pass
Protection cover for local controls, with padlock: Yes
*Drawings:
ACTUATOR SCHEMATIC WIRING DWG: MSP1710KC5--F2JE1TPA00R1AB-0E1-000 -S REV-000
ACTUATOR DIMENSIONAL DWG: SD 111244 REV-000
OUTPUT DRIVE/MOUNTING FLG. DWG: SK 099257 REV-002
-------------------------------
NEW SURPUS. Price is for (1) only, (2) are available.
Additional Prep Fees May Apply
