UHT Pasteurization System, previously operated at 20 GPM for 70 brix apple concentrate.
Include pasteurizer skid, stainless sanitary process parts and in-line valve controllers, featuring a 7-pass holding tube (2in diameter x 9ft), Avins Fabrication jacketed dome top, and a cone bottom product tank.
The system incorporates a Plate HEX APV (model R5MG916, s/n 42802) with stainless plates, 225 psig MAWP at 150 Deg. F., and dimensions of 16in x 44in x 5ft packed width, with a total unit length of 8ft and a height of 6ft.
It also includes a CIP System with a single tank CIP skid, a 30in dia x 36in stainless tank with a flip-top lid cover, 8 top ports, side bottom discharge, and an AMPCO stainless PD pump (model PEZP2-130, s/n PE-1221-R2-4, 7.5 hp/1780 rpm).
Additionally, the system has analytical flow control measuring instruments from Endress Hauser, including a ProMAG electromagnetic flow meter (190 gal/min) and Burkert DN65 pneumatic valves.
The setup features a vacuum pump (SIHI type GO-585L, 7.5 hp, 1756 rpm, 230/460V), another Plate HEX APV (type SR2MGS12, s/n 42803.2) rated for 150 psig MAWP design and 225 psig MAWP test at 300/-20 Deg. F., and an electrical control panel with automation/drive controllers, AB Compact I/O, PLC modules, 5 AB Powerflex 525 vfds, and a Phoenix Contact value lie IPC.
The system also includes a Feldmeir stainless tank and pump (s/n E0-23-04), approximately 30in dia x 36in straight side with a 12in cone bottom, a flip-top lid cover, center bottom discharge, and an AMPCO model RBZP1-130-SO (s/n CC130583-1-1R2-4)
Additional Prep Fees May Apply
