Dices, strip cuts, slices from a variety of products such as, carrots, potatoes, onions, celery, and many
other). A wide range of cutting size parts are
The machine accepts product up to 226 mm in diameter.
Slice range from 1/16" to 3/4"; Circular spindle range is 1/8" to 3"; Crosscut range is 1/8" to 1 1/2".
The machine is fed from a hopper on the side where the product enters the centrifugal impeller. The impeller has flights that carry the product to the slicing knife, this is a stationary knife. The machine has a gate adjustment to set the thickness of the first cut. The product then travels to the Circular assembly then to the Crosscut for the final of the 3 dimensional cut. The crosscuts are setup by a fixed number of blades for each different assembly and require a change based on the size cut you want. The circular assembly has spacers and also requires different amount of specifically sized spacers also with a specific sheer plate and knife holder.
Has knife holder Part # 330361; Cir Stripper - part number 330386.
Capacity is 800 KG per 1 millimeter of slice thickness per hour.
This machine seems to be in good mechanical condition, we have not checked out the motor, it will require electronics, guards and cutting parts. Rebuilding services are available. Please inquire.
Probably a $85,000.00 machine new.
Prep fee if you want crated only.
Additional Prep Fees May Apply