Complete 20,0000 pounds/hour French fry line. Manufacturer Kiremko, Holland.
Complete plant is is containers in India and can be shipped anywhere in the world.
Qty.- Description
Potato Reception
Waste water treatment (inside)
1-Stainless steel vibro feeder (destoner & washer system)
2-Stainless steel containers (d & w system)
2-Warman pumps, each with motor 11 kw (d & w system)
1-Stainless steel flotation unit with pump
1-Stainless steel hopper with 2 pumps
1-Pieralisi decanter with mono pump and platform
1-Hendress & Hauser sample station, type ASP Station
1-Polymer dosing setup with 2 pumps
Outside
1-Stainless steel sedimentation unit with screw conveyor
1-Double-walled stainless steel tank, dim 2000 x 2300 mm, including agitator
1-Stainless steel drum sieve with brush and screw, diam 150 x 5000 mm
1-Cermex polyester silo, dim 4000 x 8000/3500 mm, capacity 100 tons
Production
1-Kiremko stainless steel destoner with off going conveyor
1-Stainless steel pre-washing drum, dim 1200 x 4000 mm, with platform
1-Kiremko saltz bath with 2 revolving, glass potato removers, 1 pump and collecting hopper, platforms + stainless steel elevating screw, dim 600 x 6 000 mm
1-Tummers stainless steel dewatering drum, diam 800 x 1500 mm, including platform and all further appartenances
1-Stainless steel potato bunker, 2200 x 1500 x 1000 mm, including unloading conveyor 400 x 3000 mm
1-Stainless steel elevator, height approximately 7000 mm
1-Kiremko stainless steel steam peeler, including dosing bin, with platform
1-Stainless steel elevating screw, dim 300 x 6000 mm
1-Kiremko stainless steel deskinning drum, dim 1000 x 3000 mm, including platform, mono pump and drum sieve with pump
1-Kiremko stainless steel washing drum, dim 1000 x 2700 mm, with platform
1-Read conveyor, 500 x 4000 mm
1-DTS stainless steel elevating screw, dim 600 x 5500mm
1-Barco optical sorter with in and out feed shakers, etc
1--Kiremko roller sorter (6 rolls) with ingoing vibro feeder, with platform
2-KSB potato 8" pumps, each with stainless steel collecting bunker
1-Kiremko dubble water knives with switch unit , with shared platform
1-Kiremko single water knives
-The knives blocks for different sizes
1-Urschel rotary knife, type GA , with platform
1-Urschel rotary knife, type G , with platform
1-Stainless steel dewatering screen and 2 pumps, with platform
1-Stainless steel vibrating dewatering screen with plat forms
1-Kiremko stainless steel vibrating length sorter with dewatering sieve, various size blades and platform
1-Key stainless steel vibrating length sorter
2-Various pumps with overflow unit
1-Kiremko stainless steel dewatering screen with platform
1-Kiremko stainless steel vibrating rectifier with dewatering screen, with platform
1-Kiremko optical sorter, type Visionair , with platform
1-Best optical sorter, type Pulsarr , with platform
1-KSB 6" potato pump
1-Kiremko stainless steel spot cutter
2-Egger pumps, motor 4 kw
1-Prefab control room with stainless steel frame
1-Kiremko stainless steel dewatering sieve
1-K&K stainless steel blancher (short/high), dim 2000 x 5000 mm, including ferris wheel, pumps and platform
1-Kiremko stainless steel blancher (long/low), dim 2000 x 6000 mm, including ferris wheel, pumps and platform
1-Lubot Waker stainless steel blancher (long/low), dim 2000 x 6000 mm, including ferris wheel, pumps and platform
- The DIP dosing setup with two hoppers (dextrose, pyro) and 2 pumps
1-Kiremko stainless steel vibrating dewatering sieve : dosing conveyor, with platform
1-H&H pre-drying tunnel with conveyor, 2000 x 7500 mm, ventilators, platforms and other appurtenances
1-Kiremko vibrating dosing conveyor, with platform
1-H&H drying tunnel with conveyor, 1400 x 6000 mm, ventilators and other appurtenances
1-Kiremko homogenisation conveyor,1500 x 5000 mm , with platform
1-Kiremko vibrating dosing conveyor , with platform
1-Florigo stainless steel screen filter with all appurtenances
1-ATA insulated frying vapour condenser, diam 500 x 6000 mm
1-Kiremko Fryer FFL, suitable for 10 to 12 t/hour
1-Atraco vibrating degreasing conveyor with two air knives
1-Precooling belt, 1000 x 5000 mm, including exhausters
1-Kiremko conveyor belt, 1000 x 11000 mm
1-Kiremko vibrating dosing conveyor with platform
1-Ferguson cooling tunnel with belt, 2000 x 15000 mm and platform
3-Off going conveyors to freezer, total length approximately 30 m
1-Ferguson freezing tunnel FFP, suitable for 10 to 12 t/h
-The kiremko conveyors to packaging and bulk loading, total length approximately 30 m
Paletizing Department
-Box roller conveyors (stainless steel & steel), approximately 100 m
2-The palletizers setup , palletizers
2-Hot melt units
3-Empty pallet buffers
-The pallet conveyors, total length approximately 20 m
1-Automatic Strappex foil wrapper
-Including 4 various controls
Compressor room
1-Ingersoll Rand air compressor, type SSRM 75
1-Kaeser air compressor, type CSDX162
1-Atlas copco air dryer, type FX13
2-Steel vessels, approximately 3000 litre
1-Ingersoll Rand air dryer, type RS160
Boiler room
1-Babcock Wanson natural and bio gas fuelled steal boiler, cap 15tons/h, 18 bar, including economizer and 2 feed water pumps …
1-Water softener, 2 x dim 600 x 1600 mm, including salt vessel
1-Insulated feed degassifier, dim 1400 x 5500 mm
1-Steel flash tank (2008)
1-Manifold
4-Flow meters
-Loos switchgear and all further appurtenances
Babcock Reverse Osmoses filtration unit
2-Cross flow menbranes
2-Prefilters
1-Vertical pump
2-Ion exhangers, each with salt bin
1-Booster set with 2 vertical pumps
1-Plastic tank, diam 2000 x 2500 mm
-Including connecting piping
1-Steel hot water tank, dim 2900 x 6500 mm
1-Grundfoss booster set with 3 vertical pumps
Workshop
-The Siemens CO2 extinguishing setup, with 21 cylinders, detectors and alarm panel Cerberus
Water softener
-Babcock Wanson water softener, 2 x 140 litre
1-Steel tank, dim 1200 x 4000 mm + dosing set
NH3 Compressors, the NH3 cooling system
1-Howden NH3 compressor set (C4), type MK4B-WRV-204-1.65-50-1538, motor 250 kW
1-Insulated NH3 separator, type BP-10°C, dim 1000 x 5000 mm, with 4 pumps
2-Bac evaporators, type VRC125 (on the roof)
1-Howden NH3 compressor set (C1), type MK4-WRV-321-1.65-26-234, motor 350 kW
1-Howden NH3 compressor set (C2), type MK4B-WRV-204-1.65-50-1111, motor 250 kW
1-Howden NH3 compressor set (C5), type MK4S-WRV-255-1.10-50-226, motor 350 kW
1-Howden compressor set, type MK6B-WRV-204-1.65-26-2387, 1 Leroy Somer motor 355 kW and 2 Leroy Somer soft starters (spare)
1-Insulated NH3 separator, type BP-40°C, dim 1850 x 6150 mm, with 2 pumps
1-Insulated NH3 separator, type MP-10°C, dim 1400 x 5000 mm
1-Bac evaporator, type VCZ600
1-Bac evaporator, type VCZ159
1-Steel oil tank, vol 3200 litre, with 2 vertical pumps
1-Steel water tank, dim 1400 x 3000 mm, with 2 vertical pumps
2-Dosing sets
4-Control panels
4-MCC boxes
4-Control panels with soft starters
Palm oil storage
Click Link to View Above List of Components
1. There are 30 forty foot containers, seven of which are open containers.
2. Containers are all sealed but photos were taken just before dismantling.
3. All manuals are in the containers.
4. Equipment is ready to ship.
Additional Prep Fees May Apply
