Kysor Walk In Cooler / Freezer (+35F/-10F)
Overall Dimensions: 22'W x 80'L x 12'H
Interior of Cooler / Freezer Painted White
Cooler: +35 Deg. F., 22'W x 64'L x 12'H, No Floor
(1) Cooler Ramp: 4'-6"W x 4'L (w/Diamond Plate Overlay)
(2) Cooler Doors: 4'-6"W x 7'H
(3) Russell 7 HP Condensing Units (for +35 Deg F Cooler)
R404a/R507, 208/230V, 60 Hz, 3 Phase
(3) Russell Evaporators, R404a/R507, 208/230V, 60 Hz, 1 Phase
Freezer: -10 Deg. F., 14'W x 16'L x12'H
With Heavy Duty Floor w/Diamond Plate Overlay
(1) Freezer Door: 4'-6"W x 7'H
Interior Steel Supports for Condensing Unit (On Roof of Cooler/Freezer)
(1) Russell 15 HP Condensing Unit (for -10 Deg F Freezer)
R404a/R507, 208/230V, 60 Hz, 3 Phase
(1) Russell Evaporator, R404a/R507, 208/230V, 60 Hz, 1 Phase
Description:
Cooler and Freezer (As Shown on DWG)
- Floor in Freezer - UL Labeled for Flame Spread and Smoke Developed.
Therma-Structure (Wood Frame)
Seismic Tie-Downs: Are Not Required
Insulation:
4" and 5" Poured-N-Place Urethane Foam
General Notes:
Screed: 1-1/2" x 2-1/2" 18GA Base Angle
Nameplate: Kysor Panel Systems
Coved Base: Where Required But Not Shown Is By Others
Roof: N/A
Install: By Others
Finish:
Interior Wall: White Embossed Galvanized with PVC Film
Interior Top: White Embossed Galvanized with PVC Film
Interior Floor: 22 GA Natural Smooth Galvanize
Exterior Wall: Natural Embossed Galvanized
Exterior Top: Natural Embossed Galvanized
Exterior Floor: Natural Embossed Galvanized
Doors/Opening:
(2) C4670C (54" x 84") Inset Cooler Door
w/ 36"H DTA Kick Plates Int & Ext.
(1) F4670C (54" x 84") Inset Freezer Door
w/ 36"H DTA Kick Plates Int & Ext.
Door/Opening Hardware:
(3) Kason 78 Latch without Locking Cylinder
(3) Kason 1094 Door Closer
(9) Kason 1278 Hinges
Jamb Guards:
18GA. Stainless Steel Jamb Guards (Factory Installed)
Electrical:
(3) TI-200 Digital Thermometers
(3) Switch with Pilot Light (3-Way)
(3) CFL Light
(1) 1832 Heated Vent
Condensers Dimensions & Weights:
Cooler: 68"L x 48"W, Wt: 1100 lbs.
Freezer: 68"L x 48"H, Wt: 1310 lbs.
Minimum Design Load Uniformly Distributed:
Tops: 10 PSF, Walls: 5 PSF, *Floors: 500 PSF
* Not for Pallet Jack or Forklift
The Foam Plastic Used In This Product Complies
To The IBC Section 2603 As Follows: Flame Spread
Rating: 15, Smoke: Developed Rating: 350
These Kysor Panel Systems - Prewired Sections (115V/60Hz)
Conforms To: UL STD 471, NFPA STD 70;
Certified To CSA STD C22.2 No.120
ETL Listed C & US 0108458 Intertek
Heater Rating-Freezer Door Only: 5.0 Amps Max.
UL Classified: Building Units Surface Burning Characteristics 39M5
R10631, UL723/ASTM E-84 Class I Panel Insulation Up To 5" Thickness
Painted or Non-Painted Steel or Aluminum Finish
Panel: Flame Spread Index: 25, Smoke Developed Index: OVER 500
Insulation: Flame Spread Index: 25, Smoke Developed Index: 4
NSF Component
NOTE: This Combination COOLER/FREEZER Is In EXCELLENT CONDITION!
There Are (2) Exterior Corner Floor & Side Panels That Are Damaged, But Do Not Effect The Integrity or Performance of The Freezer Section. The Foam
Is Still Intact, Just The Galvanized Exterior Cladding Is Crumpled.
We Have A Packet of All The Dimensional Drawings & I.O.M's Available.
NOTE: This Cooler/Freezer was purchased new and installed in 2015 by a Major Pharmaceutical Company in NY.
-------------------------------------------------
NOTE: PRICE INCLUDES REMOVAL & LOADING ONTO YOUR 53' TRAILER.
----------------------------------------------------------
NOTE: All The Steel Racks & Shelving Shown In Attached Pictures Are NOT Included.
Additional Prep Fees May Apply
