PRE-OWNED TOS MN80A BENCH CENTRE LATHE
FOR FINE MECHANICS
MODEL: MN 80 A SERIAL NUMBER: 0463231
Exceptionally nice and clean precision bench lathe with lots of tooling and parts...
SPECIFICATIONS:
1. Working Range
Swing over bed: 160 mm (6.3 in)
Swing over saddle: 90 mm (3.5 in)
Height of centres over bed: 80 mm (3.15 in)
Turning Lenght: 320 mm (12.5 in)
2. Working Spindle
Dia. and length of the front bearing: 38 x 50
Bore of the working spindle: 18 mm (0.75 in )
3. Spindle Speeds
Number and Range of speed: (9) 150 - 2000 rpm
4. Feeds of saddles
Range of longitudinal feeds: 0.01 to 0.15 mm
19 metric threads with a pitch from: 0.2 to 3 mm
15 Whitworth threads - number of threads per inch from: 36 to 7
17 module threads - pitch of module: 0.2 to 1.5
5. Lead screw
Diameter x Pitch: (Tr) 16 x 3
6. Saddles
Working stroke of Cross Slide: 100 mm (4 in)
Working stroke of Tool Slide: 100 mm (4 in)
Lead of the moving screw threads: 1.5 mm
Standard Tool Section: 10 x 10 mm
7. Tailstock
Diameter of centre sleeve: 20 mm (7/8 in)
Working stroke of centre sleeve: 80 mm (3.125 in)
Internal taper of centre sleeve: 1 Morse
1 Division of indexing ring equals to : 0.05 mm
8. Collet Chucking Attachment
Max. diameter of round iron: 10 mm (1/2 in)
Max. diameter of square iron: 7 x 7 mm (0.125 x 0.125 in)
Max. diameter of hexagonal iron -
width of spanner jaws: 8 mm (0.375 in)
Step collets for external chucking from : 10 - 40 mm (1/2 - 1-1/2 in)
Step collets for internal chucking from : 10 - 50 mm (1/2 - 2 in)
Overall Dimensions:
L 45 in x W 24 in x H 51.6 in
Total Weight without attachments: 300 lbs
MOTORS SPECIFICATIONS:
220 Volts 1 PH
EQUIPPED WITH:
4'' 3-jaw chuck, 4'' 4-jaw chuck, face plate, tool post, steady rest, follow rest,
2 tailstock, dividing head, metric and Imperial gears, tooling.
Additional Prep Fees May Apply
