Can these units purify seawater?
Yes. Capable of providing potable water at a rate of 600 gallons per hour.
Purifies raw water that is highly polluted, turbid, colored, salty or contaminated. Raw water source includes lakes, streams, underground wells, ocean, and tanker truck.
The ROWPU removes suspended solids (called turbidity), chemicals, and solids held in solution (called dissolved solids), found in most fresh water and seawater sources to a level fit for human consumption. This is done by filtering, reverse osmosis, and treating the water with selected chemicals. b. Reverse Osmosis. Reverse osmosis is the process by which purified water is separated from the available fresh, seawater, or brackish water sources. High pressure is applied to the raw water side of a semipermeable membrane and desalinated product water diffuses through the membrane to the freshwater side. The 600 GPH ROWPU is arranged so that prefiltered water is pumped under pressure across the semi-permeable membranes called R.O. elements. The R.O. elements separate this water stream into a product water stream and a brine concentrate stream, both of which continuously flow away from the membranes through the R.O. pressure tubes. About 10 gallon of product water is produced for every 30 gallon of raw water processed.
Will ship Worldwide
Purifies raw water that is highly polluted, turbid, colored, salty or contaminated. Raw water source includes lakes, streams, underground wells, ocean, and tanker truck.
The ROWPU removes suspended solids (called turbidity), chemicals, and solids held in solution (called dissolved solids), found in most fresh water and seawater sources to a level fit for human consumption. This is done by filtering, reverse osmosis, and treating the water with selected chemicals. b. Reverse Osmosis. Reverse osmosis is the process by which purified water is separated from the available fresh, seawater, or brackish water sources. High pressure is applied to the raw water side of a semipermeable membrane and desalinated product water diffuses through the membrane to the freshwater side. The 600 GPH ROWPU is arranged so that prefiltered water is pumped under pressure across the semi-permeable membranes called R.O. elements. The R.O. elements separate this water stream into a product water stream and a brine concentrate stream, both of which continuously flow away from the membranes through the R.O. pressure tubes. About 10 gallon of product water is produced for every 30 gallon of raw water processed.
Length 9.45 ft. (2.88 m)
Width 6.91 ft. (2.11 m)
Height 5.68 ft. (1.73 m)
Cartridge Filter Cartridge (8 cartridge tubes) Length 40 in. (101.6 cm) x 6” dia.
Flow Rate 35 gpm (132.5 lpm) Pressure Drop 2 to 35 psid (1406 to 24,609 kg/sqm
Power Requirements (Overall) Power 22KW
Voltage 120 VAC, 1-phase; 208VAC, 3-phase, 5 wire
Frequency 60 Hertz
Current 104 amp (max)
Length 9.45 ft. (2.88 m)
Width 6.91 ft. (2.11 m)
Height.. 5.68 ft. (1.73 m)
Weight (dry) 7825 lbs (3521.3 kg)
R.O. Pump Type - Positive displacement
Pumping Capacity - 32 gpm (121 lpm) 980 psi (689,038 kg/sqm)head
Oil Capacity - 3.5 quarts (3.3 liters)
Drive- Five V-belts
Revolutions Per Minute - 500 (maximum)
Pump Weight - 330 lbs (148.5 kg)
Cartridge Filter Cartridge (8 cartridge tubes) Length 40 in. (101.6 cm)
Flow Rate 35 gpm (132.5 lpm) Pressure Drop 2 to 35 psid (1406 to 24,609 kg/sqm)
