Bohdan Automation/Metter Toledo ABL-800 Automated Weighed LabelSystem
Used - has some cosmetic wear from normal use, please see photos for details. Includes everything pictured.
Included:
Bohdan Automation ABL-800 Liquid Handling System
Mettler Toledo AT200 Balance/Scale
Zebra 110 XiIII Plus Labeler
Mettler Toledo AT200 Analytical Balance Digital Scale:
Readability:0.1 mg
Weighing capacity: 205 g
Taring range (by subtraction):0205 g
Reproducibility (s) 0...50 g: 0.04 mg
Reproducibility (s) 50...100 g: 0.05 mg
Reproducibility (s) 100...200 g: 0.07 mg
Linearity: 0.15mg
Stabilization time (typical)variable with vibration adapter: 3,5,7 s
Built-in calibration weights:2x100 gMeasured to 0.1 mg (0.01 mg AT20/21) at an air density of 1200 mg/l on virtual mass with density 8.0 g/cm3.
Calibration FACT:Fully automatic motorized self-calibration with two built-in weights (manual triggering also possible). Test possibility to check the calibration.
Calibration with external weight:200 g
Display with METTLER Deltatrac:VFD (vacuum fluorescent)
Display sequence: 0.2...0.4 s variable
Sensitivity drift (5...40C):Maximum deviation with automatic self-calibration 0.00015%, (with automatic self-calibration switched off) 1 ppm/C.
Linearization: Automatic self-linearization of the weighing curve (simultaneously with motorized calibration FACT).
Data interface:CL and RS232C, bidirectional, built in as standard, all lines galvanically separated.
Glass draft shield: No hindering guideways; automatic motorized opening or at a keystroke.
Inner draft shield AT:Standard
AC adapter (to national codes): Voltage 115 V or 230 V, admissible voltage fluctuations: +15...-20%. Frequency: 50...60 Hz; power consumption 15,5W max.
Admissible ambient conditions:Temperature: 5...40 C; relative humidity: 25...85% (non-condensing). Height above sea level: -500...+6000 m.
Weighing pan feedthrough for stainless steel below-the-balance weighing:80x80 [mm]
MeasuresWeight:Free height above weighing pan 239 mm, Balance housing 241x433x289 (WxLxH), AC adapter 115x140x53mm (WxLxH) Balance 9.3 kg, AC adapter 1.2kg
Zebra 110XiIII Plus Labeler:
Specifications:
Print Method - Thermal Transfer or Direct Thermal.
Print Resolution - 600 dots per inch (dpi).
Print Speed - up to 4 inches per second (ips).
Print Width - up to 3.2 in. wide.
Memory - 16MB SDRAM & 4MB Flash.
Ethernet & Wireless interface options.
ZebraLink connectivity.
Construction - 12 gauge steel frame.
Dimensions - 19.5 x 10.37 x 15.5 in.
Additional Prep Fees May Apply.
