Browse our other Lab Equipment
Hitachi/Transgenomic L-7100 HPLC Pump w/ D-7000 Interface**This unit has been tested for basic power function. Units have some wear and scratches from normal use. Pump is missing side panel and software is NOT included. See photos for details.The Hitachi/Transgenomic L-7100 HPLC pump provides the highest possible degree of precision and reliability for high quality analytical results. Corresponding to the requirements of modern quality assurance, it is equipped with intelligent function control and incorporates a documentation facility. Versatile in its application, it has become a universal pump module in the HPLC laboratory. Apart from its control by the D-7000 HPLC Interface, the eL-7100 can also function as a stand-alone system controller.Specifications:Liquid Feed System: Dual Plunger reciprocating Pump, series connectedMaximum Discharge pressure: 39.2 MPaDischarge Rate Range: 0.001 to 9.999 ml/minPressure Limit Range: 0 to 41.2 MPaDischarge Volume of Plunger 1: 100 uL/strokeFlow Rate Setting Accuracy + or 2%Flow rate Stability: 0.2% RSD or lessPressure Display Accuracy: + or 5%Pump Control Mode:Single-liquid delivery modeLow Pressure Gradient modeHigh Pressure Gradient modeThe Hitachi/TransgenomicD-7000 Interface is used for optimal control of a system of modules and data collection in conjunction with the D-7000 software. The built-in D-Line connection enables the transfer of all system parameters, error messages and digital signals for 7000 detectors with analog signal output.***From the manufacturer. The message D LINE SYSTEM IS NOT READY should appear on the L-7100 display. If it does not then the Pump has not been set up correctly. To operate remotely the pump should be set to receive instructions from the D-line module mounted on the side of it.Additional Prep Fees May Apply