Dionex UltiMate 3000 Pump DGP-3600M P/N 5035.0050
**This DGP-3600M Pump has been tested for basic functionality. (Chromeleon Software NOT included). See photos for details.
The Dionex UltiMate 3000 DGP-3600M pump is a modern high-quality instrument designed for HPLC analysis, especially as part of the UltiMate 3000 system. The pump was especially developed for routine HPLC analysis and can be used in numerous laboratory environments. The instrument performs equally well as a flexible and reliable module for routine analysis and sophisticated research tasks.
-The patented isokinetic pre-compression allows a precise and almost pulse-free flow.
-The technical specification meets the highest requirements for flow rate reproducibility, zero pulsation, and operational reliability.
-All pumps (except the semipreparative pump) are fitted with floating pistons, allowing compensation for small mechanical tolerances within the specification and
thus enhancing the robustness of the pump.
-Various monitoring and diagnostic features are provided for optimum system performance and reliability ( page 27).
-For the secure and functional positioning of the solvent reservoirs on top of the pump, the Solvent Racks of the UltiMate 3000 series are available.
-The pump can be fully controlled by the Chromeleon Chromatography Management System, providing a high degree of system integration.
-All parts that may be exposed to solvents are made of materials that provide optimum resistance to the most commonly used solvents and buffer solutions.
The pump is designed to perform equally well as a dependable system for routine analyses or as a sophisticated research instrument for use in HPLC (high performance liquid chromatography) applications, especially as part of the UltiMate 3000 system. However, it can also be used with other HPLC systems if adequate control inputs and outputs are available. A PC with USB port is required.
Manufacturers Specifications:
Type - Specifications
-Recommended Flow Rate: 10-2500ul/min
-Flow Rate Accuracy: +/-0.5% at 200ul/min; 0.5% at 200 L/min; (typical 0.25% at 200 L/min)
-Flow rate precision: <0.05% RSD or <0.01 min SD, whichever is greater
-Pressure range: 2-50 MPa (7250 psi)
-Pressure ripple: Typical <0.2 MPa or <1%whichever is greater
-Proportioning accuracy: 0.2% of fullscale
-Proportioning precision: <0.5% SD at 200 L/min
-No. of eluent lines: 6 (2 x 3)
-Grad. delay volume: 230 L
-Solvent degassing: External (optional)
-PC connection: All functions controllable via USB 1.1; integrated USB hub with three free USB ports
-I/O interfaces: 3 digital inputs, 4 programmable relays, 1 analog output for pressure monitoring 15-pin D-Sub connector for Solvent Rack/degasser connection
-Safety features: Leak sensor; Active rear seal washing with monitoring of the piston seal tightness and the liquid level of the liquid reservoir
-User input/display: LCD indicating system parameters, Standby button, 3 LEDs (Power, Connected, and Status) for status monitoring, 4 function keys for operation
during initial installation and maintenance
-GLP: In Chromeleon: Full support of automatic equipment qualification (AutoQ) and System Wellness monitoring. All system parameters are logged in the Chromeleon
Audit Trail
-Wetted parts: Stainless steel or titanium (for biocompatible pumps), sapphire, ruby, UHMW polyethylene, PCTFE, PTFE, PEEK, zirconium oxide, aluminum oxide, FEP,
ECTFE
-Emission sound pressure level: ion sound pressure level:< 70 dB(A) in 1-m-distance
-Environmental conditions: Range of use: Indoor use; Temperature: 10 C to 35 C; Air humidity:80% relative humidity, non-condensing; Overvoltage category: II; Pollution
degree: 2
Additional Prep Fees May Apply
