Browse our other Lab Equipment
SP Scientific Genevac Rocket Synergy 2 Evaporator RKS2-12060-SNW - Need Fix**This unit is for sale AS/IS. Lid won't lock due to a bad sensor. See photos for details.Gain momentum with our high-speed benchtop evaporator. Whatever your research or laboratory needs, the SP Genevac Rocket Synergy 2 evaporator is designed to expedite your workflow with minimal hands-on time.Dry or concentrate up to six flasks each containing a maximum of 450 mL of solvent, or 18 ASE vialsDri-Pure anti-bumping technologyPatented vacuum technology evaporates solutions rapidly and safelyInterchangeable rotors to give flexibility with sample formatFocus on generating high-quality science and let our Rocket Synergy 2 do the hard work for you!The SP Genevac Rocket Synergy 2 was designed with your time in mind. Never has solvent evaporation been so easy thanks to walk-away automation, easy to use controls, and interchangeable rotors that allow you to process sample volumes of up to 5 L.Auto-draining, frost-free solvent condenser, collects all solvents as liquids. Combined with our auto-draining and low-pressure steam heating technology, your evaporation process is faster and more precise than ever before.Application ExamplesParallel ChemistryFood & BeverageNatural Products ResearchPost Purification Sample HandlingOils, Fuels and FatsEnvironmental TestingFeatures & BenefitsSemi-automated from start to finish, saving you valuable timeCompact design the Rocket Synergy 2 takes the place of several rotary evaporators, freeing up precious lab spaceKeeps precious samples safe Dri-Pure technology eliminates foaming, bumping and cross-contaminationFlip-flop and SampleGenie enable samples to be concentrated or dried directly in storage or autosampler vials, increasing sample recovery and improving inter-sample reproducibilitySimplified data transfer upload/download data via USB keyReal-time viewing - on-board strobe means that you can view each of the six flask positionsUnparalleled solvent recovery - a powerful recirculating chiller is now available for the Rocket Synergy 2 evaporatorManufacturers Specifications:Maximum rotor speed: 1760 rpm (ask rotor) or 1530 rpm (bowl rotor)Flask rotor capacity: 6 x 400 mlBowl rotor capacity: 5 litresNominal sample load: g force 500 gTemperature control range: 30 C to 60 CVacuum Pump: (Integral)Type: Diaphragm pumpUltimate system vacuum < 3mbarCondenser (Integral)Type: Aluminium water jacketMinimum coolant temp: -15 CRequired coolant low rate: 1.5 0.5 litres/minuteMax. coolant inlet pressure: 30 psi (2 bar g)Inert Gas Supply (IGP option only)Maximum pressure 1.5 bar g (2.5 bar abs.)Minimum pressure 1 bar g (2 bar abs.)Flow rate (nominal) 30 litres/minuteHose length 2.5 mConnector type 3/8 BSP femaleEmissionsNoise (@ 1 metre) 63 dB(A)Operational EnvironmentAmbient temperature: 15 C to 30 CRelative humidity: 10-80% non-condensingAltitude Sea-level: to 1600 mMin. ventilation air-gap: 75 mmIngress protection rating: IP 20Installation environment: Indoor only. Static-dissipative laboratory or similarAdditional Prep Fees May Apply