Browse our other
Lab Equipment

Item Details
Item specification details
Property Value
Item Id 408853
Item #: 408853
Item: THERMO FORMA 8525 Ultra Low Temperature Freezer
Model #: 8525
Serial #: N/A
Year Built: N/A
Location: California
Price: $4,749.00
Description

Thermo Forma Scientific -86 Ultra Low Temperature Freezer Model 8525

***This ultra-low temp freezer has been tested to meet specifications. Unit has slight wear from normal use. Buyer can expect a working unit and 30-day warranty. See photos for details.
(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)

The 8500 Series Forma Scientific non-CFC, Ultra-Low Temperature Freezers feature front-to-back air circulation for cooler compressor temperatures, increased performance and reliability and longer compressor life. In this unique system, ambient air enters the front grill of the freezer and passes through the filter, condenser and compressor housing, exiting out of the rear of the unit. An enlarged condenser and two cooling fans also contribute to better efficiency and help extend compressor life. Cleaning the air filter and condenser fan is done from the front of the unit.

Other important features of the Forma Scientific 8500 Series Freezers are:
Enviro-Scan Microprocessor Monitoring System
Enviro-Scan uses a digital display, audible and visual indicators and a touch sensitive keypad to provide total control of all freezer functions. The module digitally displays chamber temperature and control setpoint, to the nearest degree C. High and low alarm set points are easily programmed. A back-up battery system supplies power to the monitoring system during electrical outages.

An RS-232 port provides a computer interface and monitoring of temperatures and alarms. A remote alarm connector is also a standard feature.

Non-CFC, non-HCFC and non-flammable refrigerants
Committed to a safer, healthier environment, Forma Scientific has phased out the use of ozone depleting CFC (chlorofluorocarbons) in all of the company's refrigerated products. Forma also uses non-CFC foamed-in-place urethane insulation and all packaging materials used in shipping are non-CFC.

Peak Control System
Due to the increased demands on today's refrigeration systems, Forma Scientific has engineered a compressor protection system called PEAK Control. In this system, a pressure switch senses excessive compressor discharge pressure. When the discharge pressure exceeds the design limit, a solenoid valve opens allowing refrigerant to enter an expansion tank. The refrigerant returns to the system through a capillary tube. The PEAK Control System continues to monitor system pressures, insuring they stay within design limits to help extend compressor life.

Smart Condenser Fans
For maximum compressor protection, all Forma ULT freezers include two tubes.
axial fans in the compressor housing. When both compressors are running, both fans operate to pull ambient air through the condenser and over the compressors. When both compressors are off, one fan remains ready to cycle on when the thermostat senses a temperature rise above 32C.

Built-In Automatic Voltage Compensation
A built-in, automatic voltage compensator is built into every Forma 8500 Series
non-CFC, Ultra-Low Temperature Freezer to detect and respond to high or low voltage situations. Voltage from the incoming power supply is monitored and adjusted by the automatic voltage compensator, ensuring compressor operation within design parameters. A light on the front of the control panel indicates when incoming voltage is being corrected.

Manufacturer's Specifications:
Temperature: -50 C (-58F) to -86 C (-123F)
Interior Dimensions:23.0 W x 51.5 H x 19.25 F-B (58 cm x 131 cm x 48.9 cm)
Refrigeration: Two 1/2 HP Compressors (Cascade System)
Capacity: 13 Cu. Ft. (368 liters)
Insulation Type: CFC-free foamed-in-place urethane
Sides: 5 (12.7cm)
Door: 4.5 (11.3 cm)
Electrical:8525: 230VAC, 1 PH, 50/60 Hz, 12.0 FLA
Operating Range: 208VAC - 240VAC
Breaker Requirements: 15 Amp, 220 VAC (Dedicated circuit recommended)

Additional Prep Fees May Apply

Shipping
Item shipping dimensions and specifications
Dimension Measurement
Height: 78.00 in
Width: 37.00 in
Length: 33.00 in
Weight: 500.00 lbs
Prep Fee: N/A
Registered customers can request free US domestic shipping quotes. Quotes take 1-3 business days to process.

Analytics chart icon This item has  today
Sell item icon Have one to sell?
Sell
Need Financing? First Citizens Bank Finance link logo

Testimonials

  • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
  • "The strength of their site is how often our machinery comes up on web searches." - John G.
  • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
  • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
  • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
  • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
  • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
  • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.