NEW ERA PUMP SYSTEMS NE-300 Syringe Pump for Sale

New Era Pump Systems NE-300 Syringe Pump

**This unit has been tested to specifications. Unit has slight cosmetic blemishes from normal use. Buyer can expect a working machine with 30-day warranty. See photos for details.

(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)

The New Era NE-300 Infusion One is a basic, easy-to-use one channel infusing syringe pump. It is the most cost-effective solution to begin working with microfluidics.

Just the features that you want, and none that you don't want to pay for.

Holds 1 Syringe from micro-liter sizes up to 60 mL. (140 mL partially filled)
Infusion rates from 0.73 L/hr (1 mL syringe) to 1500 mL/hr (60 mL syringe)
Pumps continuously until you stop the pump
Infusion rate can be changed while pumping

Syringe purge mode
Power failure mode allows pump to continue pumping on power up
Remembers previous settings on power up

Easy-to-use keypad interface:
Set the syringe diameter, pumping rate, press Start
Selectable infusion rates units: mL/hr, L/hr, mL/min, L/min
Displays total volume dispensed in mL or L units

Precise reproducible flow rates
Space Saving Chassis: Foot print size of only 5 3/4 x 8 3/4
Won't take up unnecessary space on your laboratory or production bench

Disposable, Glass, Stainless Steel Syringes and Plumbing Suppliesare sold separately.

Manufacturer's Specifications:
Syringe compatibility
Holds 1 syringe from L up to 60 mL (140 mL partially filled)

Syringe inner diameter range
0.100 to 50.00 mm

Flow range
0.73 L/h (1 mL syringe) to 1257 mL/h (60 mL syringe)

Speed range
0.004205 cm/h to3.7742 cm/min

Max. force
15.8 kg (35 lbs) at minimum speed
8.2 kg (18 lbs) at maximum speed

Accuracy
+/- 1%

Reproducibility
+/- 0.1%

Pump modes
Syringe purge mode

Power failure mode: the pump resumes pumping after reset

Infusion rate can be changed while pumping

The pump runs continuously until you stop it. Does not withdraw, no volume target, no computer interface or programmability.

Selectable units
mL/h, L/h, mL/min, L/min

Dimensions
22.9 x 14.6 x 11.4 cm

Power supply
12 VDC

Additional Prep Fees May Apply