VWR Masterflex L/S 7555-00 Analog Variable-Speed Console Drive w/ Pump Head
***This unit was tested to specifications. Unit is in excellent condition with little to no-wear from normal use. Buyer can expect the same item pictured with 30-day warranty. See photos for details.
(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)
Compact and cost effective for general fluid transfer applications.
Flow rate 0.42 to 2900 ml/min with L/S tubing flow rate depends on drive rpm, pump head, and tubing size
Simple operation with single-turn speed control
Separate power switch enables you to maintain speed setting when turning drive on/off; front-panel LED indicates power on
Reversible motor lets you easily prime/purge tubing and pump in either direction
Remote control of start/stop via DB9 connector on back of drive
Drives accept nine different pump head types: Standard, Easy-Load, Easy-Load II, Easy-Load 3, Multichannel, High-Performance, Cartridge, PTFE tubing, and PTFE-diaphragm. Drives 07555-00 and -05 are not recommended for use with the PTFE-tubing and PTFE-diaphragm pump heads.
Key Features
Flow rate 0.42 to 2900 ml/min with L/S tubing flow rate depends on drive rpm, pump head, and tubing size
Simple operation with single-turn speed control
Separate power switch enables you to maintain speed setting when turning drive on/off; front-panel LED indicates power on
Reversible motor lets you easily prime/purge tubing and pump in either direction
Remote control of start/stop via DB9 connector on back of drive
More About This Item
Compact and cost effective for general fluid transfer applications.
Drives accept nine different pump head types: Standard, Easy-Load, Easy-Load II, Easy-Load 3, Multichannel, High-Performance, Cartridge, PTFE tubing, and PTFE-diaphragm. Drives 07555-00 and -05 are not recommended for use with the PTFE-tubing and PTFE-diaphragm pump heads.
Model 07555-00
Plug type US
Max. flow rate 2900 ml/min
No. of Pump Heads Accepted 1
Housing material Painted steel and ABS plastic
Max. RPM 600 rpm
Power 90 - 130 VAC; 50/60 Hz; 1.5 A
Cloud connected No
Control Type Analog Variable Speed
Digital dispensing No
Drive height 134 mm (5.3)
Drive IP rating IP 22
Drive length 230 mm (9.1)
Drive width 183 mm (7.2)
Min. RPM 20 rpm
Motor 37 W
Motor hp 1/20
Open-head sensor No
Pump series L/S
Remote I/O Start/Stop
Reversible motor Yes
Speed Variable
Speed control 5%
Type of pump heads accepted Standard, Easy-Load, Easy-Load II, Easy-Load 3, Multichannel, High-Performance, Cartridge
Washdown capable No
Current 1.5 A
Frequency 50/60 Hz
Voltage 90 - 130 VAC
Masterflex L/S Easy-Load Head for Precision Tubing, 4-Roller, PARA Housing, SS Rotor
Save time with fast tubing changes and reduced maintenance.
New design and automatic tubing retention allow for multiple tubing sizes change tubing without removing head from drive
Rotor is constructed of stainless steel (SS) for enhanced durability
Pump heads are stackable for multichannel applications
Compact design for efficient use of space
Suitable for use with L/S Precision pump tubing sizes
This Easy-Load pump head accepts precision tubing ensures optimal performance from your Masterflex pump. Select a pump head for one of the following precision tubing sizes: L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, L/S 18.
Model 07514-10
Rollers 4
Max. flow rate 2300 ml/min
Housing material Polyarylamide (PARA)
Rotor Material Stainless Steel
Height 105 mm (4.12)
Length 64 mm (2.5)
Width 105 mm (4.12)
Gear ratio 1:1
No. of Channels 1
Occlusion Fixed
Open-head sensor No
Optimum RPM range 0.02 - 600 rpm
Pump series L/S
Suction lift 8.2 m (26.8 ft.)
Tubing retention Automatic
Tubing sizes accepted L/S 13, L/S 14, L/S 16, L/S 25, L/S 17, L/S 18
Volume per revolution with L/S 13 tubing 0.06 ml
Volume per revolution with L/S 14 tubing 0.21 ml
Volume per revolution with L/S 16 tubing 0.8 ml
Volume per revolution with L/S 17 tubing 2.8 ml
Volume per revolution with L/S 18 tubing 3.8 ml
Volume per revolution with L/S 25 tubing 1.7 ml
Additional Prep Fees May Apply