Keyence High-Speed, High-Precision, Wide-Area Static Elimination Blower SJ-F5500
***The Keyence high-speed, High-precision Wide-area Static Elimination Sensing Ionizer fan was tested to specifications. Unit is in like new condition with little use. Buyer can expect the same item pictured and 30-day warranty. See photos for details.
(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)
Highest Static Elimination Speed in its class
Reducing electrostatic problems by eliminating static in the entire environment including manufactured goods, the human body and surrounding components.
By combining the reputable pulse AC method and I.C.C control, the SJ-F Series has achieved the best ion production per electrode in its class. In addition, by inserting a high-power fan into the louver structure, the SJ-F Series has also achieved the fastest wide-area static elimination in its class.
High-precision ion balance of the entire area
The SJ-F Series has adopted the pulse AC method that applies high voltage to the + and - electrode probes, producing ions of both polarity. By improving the close-range ion balance that is an issue with conventional methods, high-precision ion balance has been achieved over the entire area.
Wide-range air volume adjustment
With a compact, large air volume fan and independent PWM control, wide-range adjustments become possible from ultra-low air volumes all the way to large air volumes. Any application is possible, including applying film where close range, moderate air volume is necessary, or where long-distance, high-speed static elimination is required.
Sensing ionizer
Auto-sensing and feedback functions of the I.C.C. control method are pre-installed in the device. By supplying ions at the optimal balance to the electrostatic charge, complicated initial settings and maintenance become obsolete, thus allowing increasingly effective static elimination.
Low maintenance
By incorporating KEYENCEs unique I.C.C. control method, the degradation of static elimination resulting from wear or buildup on the probes is reduced, saving on maintenance costs up to 3 times compared to conventional models.
Applications:
Static elimination of separator films for lithium ion batteries
Static elimination on chip and PCB products
Static elimination during electronics production processes
Static elimination of resin molded products
Prevent defective blister packages
Static elimination of containers
Manufacturer's Specifications:
Model
SJ-F5500
Type
600 mm23.62type
Voltage application method
Pulse AC method
Applied voltage
7000V
Ion balance control method
I.C.C.
Ion balance
5 V*1
Static elimination time
Approx. 0.6 sec*2
Operating distance
50 mm1.97min.
Maximum wind speed
5.7 m/s18.70 ft/s*1
Maximum air volume
10.0 m3/min353.15 CFM
Ozone density
0.005 ppm max.
Power source input type
AC cord input
Rating
Power voltage
100 to 240 VAC, 50/60 Hz
Power consumption
90 VA
Environmental resistance
Pollution degree
2
Overvoltage category
II
Ambient temperature
0 to +50 C32 to 122 F
Relative humidity
35 to 65 % RH
Weight
Approx. 5 kg
Additional Prep Fees May Apply
