Browse our other Lab Equipment
KeyTek MiniZap ESD Simulator Model MZ-15***Item is preowned with slight wear from normal use. 30-day warranty included with purchase. Everything pictured included. See photos for details.(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)The Keytek MZ15ESD Simulator/Gun allows for electrostatic discharge testing to air discharge to 15kV and contact mode to 8kV with simple, intuitive operation. The MZ-15 also known as the Keytek Minizap, is light weight and durable lending itself well to long-term use in harsh environments in the field. It is well known within the industry and testing criteria is changed by turn nobs.This electrostatic discharge generator is ideal for testing to EN IEC 61000-4-2, ANSI C63.16, and others through manipulation output voltage selection and pulse repetition rate selector knobs. The interchangeable plug-in tips allow for testing to different standards. The polarity can be switched on the test equipment by switching the output polarity selection on the side of the equipment.The Minizap ESD simulator does not use a voltage multiplier, and won't introduce testing errors and uncertainties due to streams of artificial, high-level ESD multiples generated by a human discharge or by other simulators. The Keytek simulator is easily mounted on a tripod allowing for tests to be ran consecutively without user fatigue. Real time voltage is displayed via the actual output voltage indicator with accuracy typically at +/- 3% for this product.Keytek 16kV Simulator Features:16kV Air Discharge & 8kV Contact Discharge (10V Steps)Rugged, Portable and Self Contained ESD SimulatorIEC 61000-4-2 ESD Solution, 150pF/330 NetworkCommon ESD StandardsEN/IEC 61000-4-2&ANSI C63.16Voltage Range Air Discharge+/- .5kV to 15kVVoltage Range Contact Mode+/- .5kV to 8kVRC Network150 pf/ 330 ohmResolution10 VoltsRepetition RateSingle shot mode, 1 shot/sec, 20 shots/secProgrammableNoBattery Recharge TimeNiCd 10-12 hoursNetworks150 pF/330 ohm standard (other RC networks available)Lock OnStandard (with safety interlock)Rep RateSingle shot as well as 1/sec and 20/sec repetitive operationHV DisplayDigital LCD display measures actual HV at the tip with 10 V resolution, ~3% accuracyGround Connect WarningLED indicates ground cable not connected to testerPowerOperates from 120-240 VAC, 50/60 Hz or 4 NiCd batteries with LED charge status indicatorWeight822 grams, 1.8 poundsDimensions25.4x8.9x8.1 cm, 10x2.5x3.2 inchesAdditional Prep Fees May Apply