KEYTEK MZ-15 MiniZap ESD Simulator for Sale

KeyTek MiniZap ESD Simulator Model MZ-15

***Item is preowned with slight wear from normal use. 30-day warranty included with purchase. Everything pictured included. See photos for details.

(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)

The Keytek MZ15ESD Simulator/Gun allows for electrostatic discharge testing to air discharge to 15kV and contact mode to 8kV with simple, intuitive operation. The MZ-15 also known as the Keytek Minizap, is light weight and durable lending itself well to long-term use in harsh environments in the field. It is well known within the industry and testing criteria is changed by turn nobs.

This electrostatic discharge generator is ideal for testing to EN IEC 61000-4-2, ANSI C63.16, and others through manipulation output voltage selection and pulse repetition rate selector knobs. The interchangeable plug-in tips allow for testing to different standards. The polarity can be switched on the test equipment by switching the output polarity selection on the side of the equipment.

The Minizap ESD simulator does not use a voltage multiplier, and won't introduce testing errors and uncertainties due to streams of artificial, high-level ESD multiples generated by a human discharge or by other simulators. The Keytek simulator is easily mounted on a tripod allowing for tests to be ran consecutively without user fatigue. Real time voltage is displayed via the actual output voltage indicator with accuracy typically at +/- 3% for this product.

Keytek 16kV Simulator Features:
16kV Air Discharge & 8kV Contact Discharge (10V Steps)
Rugged, Portable and Self Contained ESD Simulator
IEC 61000-4-2 ESD Solution, 150pF/330 Network

Common ESD Standards
EN/IEC 61000-4-2&ANSI C63.16

Voltage Range Air Discharge
+/- .5kV to 15kV

Voltage Range Contact Mode
+/- .5kV to 8kV

RC Network
150 pf/ 330 ohm

Resolution
10 Volts

Repetition Rate
Single shot mode, 1 shot/sec, 20 shots/sec

Programmable
No

Battery Recharge Time
NiCd 10-12 hours

Networks
150 pF/330 ohm standard (other RC networks available)

Lock On
Standard (with safety interlock)

Rep Rate
Single shot as well as 1/sec and 20/sec repetitive operation

HV Display
Digital LCD display measures actual HV at the tip with 10 V resolution, ~3% accuracy

Ground Connect Warning
LED indicates ground cable not connected to tester

Power
Operates from 120-240 VAC, 50/60 Hz or 4 NiCd batteries with LED charge status indicator

Weight
822 grams, 1.8 pounds

Dimensions
25.4x8.9x8.1 cm, 10x2.5x3.2 inches

Additional Prep Fees May Apply