Browse our other
Lab Equipment

Item Details
Item specification details
Property Value
Item Id 418521
Item #: 418521
Item: AGILENT G1364C Automatic Fraction Collector
Model #: G1364C
Serial #: N/A
Year Built: N/A
Location: California
Price: $3,000.00
Description

The Agilent 1100 Series G1364C Automatic Fraction Collector has three operating modes that consist of: Discrete Fractions, which is the default mode for all vessels, where the flow is diverted to waste, while moving from one vessel position to the next vessel position; Continuous Low is available only when using the deep well plates; and Needle Into Location where the needle pushes into the vessel as deep as specified, for the use with capped vials and test tubes and well plates with closing mats.

Manufacturer Specification
Trigger Modes
Time slices, Peak (threshold, up- /downslope), Timetable (combination of time intervals and peak) and Manual trigger (supported only with G1323BControl Module)

Operating Modes
Discrete fractions: default mode for all vessels. The flow is diverted to waste, while moving from one vessel position to the next vessel position Continuous flow: optional, available only when using well plates. It is possible to move from one well plate position to the next one without diverting the flow into the well plate to waste

Test Tube/Plate Sizes
Minimum 48 mm to 100 mm maximum

Maximum Tube Volume
ca. 45 ml

Maximum Flow Rate
100 ml / min (depending on viscosity and generated back pressure, max. 6 bar at the diverter valve)

Delay Volumes [l]
Fraction collector inlet to diverter valve: -500 (typical, depends on length of the tubing)

Diverter valve: ~15
Diverter valve to needle: ~110
Needle: -~5

Delay Calibration Sensor
Single wavelength absorbance detector working at 654 nm, consisting of a LED and a photo diode

Diverter Valve
3/2 Diverter valve with low internal volume (15 l), switching time < 100 ms, maximum operating pressure 6 bar

Maximum Capacity
3 fraction collectors in parallel plus one recovery fraction collector connected via 12-Position, 13-Port Selector valve

Interfaces
Controller-area network (CAN). optional; LAN or external contacts interface RS232C, APG-remote (for remote start / stop signals to / from other modules) Interface to G1330A Thermostat CAN-DC-out for operation of Agilent approved external devices like valves

Safety Features
Leak detection and safe leak handling, error detection and display, exhaust fan for fume extraction of hazardous vapors

Additional Prep Fees May Apply
Shipping
Item shipping dimensions and specifications
Dimension Measurement
Height: 8.00 in
Width: 14.00 in
Length: 17.00 in
Weight: 45.00 lbs
Prep Fee: N/A
Registered customers can request free US domestic shipping quotes. Quotes take 1-3 business days to process.
Analytics chart icon This item has  today
Sell item icon Have one to sell?
Sell
Need Financing? First Citizens Bank Finance link logo

Testimonials

  • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
  • "The strength of their site is how often our machinery comes up on web searches." - John G.
  • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
  • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
  • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
  • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
  • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
  • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.