Thermo Scientific 3307 Forma Steri-Cult Dual Stack CO2 Incubator
***This double stack CO2 incubator was tested to specifications. Both units able to reach max temp at 50c. Unit is preowned with slight wear from normal use, (scratches & chipped paint on front panel.) Buyer can expect the same item pictured with 30-day warranty. (Castors not included.) See photos for details.
(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)
Carry out high-volume culturing with a high-level of contamination control with these stackable Thermo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.
Direct Heat Chamber
The high capacity chamber are designed to provide maximum culturing space for high throughput applications
Standard right hand door swing
Polished stainless steel interior with coved corners is designed to be easy-to-clean
Active airflow gently distributes air throughout the chamber ensuring homogeneous conditions
Gentle airflow circulation is designed to reduce the risk of cross contamination
Sturdy stainless steel shelves and supports can be removed without tools for easy cleaning or adjustment
IR (Infrared) CO2sensor provides precise monitoring and is unaffected by changes in rH setpoint
Active Humidity Control
Humidity level is easily adjustable with no water pan to manage
External water reservoir is designed to minimize chamber contamination and allows refilling without opening chamber
At-a-glance water level indicator helps prevent sample desiccation
140C Sterilization Cycle
On-demand 140C overnight (14 hours) sterilization cycle is independently validated
Simplifies cleaning and eliminates the need for separate autoclaving and reassembly of components
Designed to effectively eliminate bacteria, mold, yeast, and mycoplasmas from internal surfaces
ISO Class 5 HEPA Filtration Airflow System
In-chamber HEPA air filtration continuously filters entire chamber volume every 60 seconds
Reaches ISO Class 5 air quality in 5 minutes after door opening
Continuous protection minimizes contaminants settling on interior surfaces
Enviro-Scan Microprocessor Control
Easy-to-use, alphanumeric LED display
Flexible, intuitive controls with message center including process and alarm status messages
Configurable audible on/off, access code, tracking low and high alarms
Manufacturer's Specifications:
Capacity (English): 8.2 cu. ft.
Certifications/Compliance: UL, cUL, CE
Data Outputs: Optional 4-20mA
Description: Single 232L incubator
Capacity (Metric): 232.2 L
Chamber Material: Polished Stainless Steel
CO2 Concentration Range: 0 to 20%
CO2 Sensor Technology: IR Sensor
Lighting: LED
Material: Stainless Steel
Oxygen Control: None
Relative Humidity: 95%, controllable
Temperature Range (Metric): Ambient +5C to 50C
Type: CO2 Incubator
Humidity Source: External humidity reservoir
Model: 3307
Dimensions (D x W x H) Interior: 20.6 x 20.8 x 32.8 in. (52.3 x 52.8 x 83.8 cm)
Dimensions (L x W x H): 27 x 35 x 39.4 in. (68.6 x 88.9 x 100.1 cm)
Weight (English): 330 lb.
Electrical Requirements: 115 V, 50/60 Hz
Voltage: 115 V
Unit Size: Each
Additional Prep Fees May Apply