Browse our other
Lab Equipment

Item Details
Item specification details
Property Value
Item Id 418544
Item #: 418544
Item: THERMO SCIENTIFIC 3307 Forma Steri-Cult Dual Stack CO2 Incubator
Model #: 3307
Serial #: N/A
Year Built: N/A
Location: California
Price: $7,000.00
Description

Thermo Scientific 3307 Forma Steri-Cult Dual Stack CO2 Incubator

***This double stack CO2 incubator was tested to specifications. Both units able to reach max temp at 50c. Unit is preowned with slight wear from normal use, (scratches & chipped paint on front panel.) Buyer can expect the same item pictured with 30-day warranty. (Dolly not included.) See photos for details.

(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)

Carry out high-volume culturing with a high-level of contamination control with these stackable Thermo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Direct Heat Chamber
The high capacity chamber are designed to provide maximum culturing space for high throughput applications
Standard right hand door swing
Polished stainless steel interior with coved corners is designed to be easy-to-clean
Active airflow gently distributes air throughout the chamber ensuring homogeneous conditions
Gentle airflow circulation is designed to reduce the risk of cross contamination
Sturdy stainless steel shelves and supports can be removed without tools for easy cleaning or adjustment
IR (Infrared) CO2sensor provides precise monitoring and is unaffected by changes in rH setpoint

Active Humidity Control
Humidity level is easily adjustable with no water pan to manage
External water reservoir is designed to minimize chamber contamination and allows refilling without opening chamber
At-a-glance water level indicator helps prevent sample desiccation

140C Sterilization Cycle
On-demand 140C overnight (14 hours) sterilization cycle is independently validated
Simplifies cleaning and eliminates the need for separate autoclaving and reassembly of components
Designed to effectively eliminate bacteria, mold, yeast, and mycoplasmas from internal surfaces

ISO Class 5 HEPA Filtration Airflow System
In-chamber HEPA air filtration continuously filters entire chamber volume every 60 seconds
Reaches ISO Class 5 air quality in 5 minutes after door opening
Continuous protection minimizes contaminants settling on interior surfaces

Enviro-Scan Microprocessor Control
Easy-to-use, alphanumeric LED display
Flexible, intuitive controls with message center including process and alarm status messages
Configurable audible on/off, access code, tracking low and high alarms

Manufacturer's Specifications:
Capacity (English: )8.2 cu. ft.
Certifications/Compliance: UL, cUL, CE
Data Outputs: Optional 4-20mA
Description: Single 232L incubator
Capacity (Metric): 232.2 L
Chamber Material: Polished Stainless Steel
CO2 Concentration Range: 0 to 20%
CO2 Sensor Technology: IR Sensor
Lighting: LED
Material: Stainless Steel
Oxygen Control: None
Relative Humidity: 95%, controllable
Temperature Range (Metric): Ambient +5C to 50C
Type: CO2 Incubator
Humidity Source: External humidity reservoir
Model: 3307
Dimensions (D x W x H) Interior: 20.6 x 20.8 x 32.8 in. (52.3 x 52.8 x 83.8 cm)
Dimensions (L x W x H): 27 x 35 x 39.4 in. (68.6 x 88.9 x 100.1 cm)
Weight (English): 330 lb.
Electrical Requirements: 115 V, 50/60 Hz
Voltage: 115 V
Unit Size: Each

Additional Prep Fees May Apply
Shipping
Item shipping dimensions and specifications
Dimension Measurement
Height: 79.00 in
Width: 35.00 in
Length: 27.00 in
Weight: 660.00 lbs
Prep Fee: N/A
Registered customers can request free US domestic shipping quotes. Quotes take 1-3 business days to process.
Analytics chart icon This item has  today
Sell item icon Have one to sell?
Sell
Need Financing? First Citizens Bank Finance link logo

Testimonials

  • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
  • "The strength of their site is how often our machinery comes up on web searches." - John G.
  • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
  • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
  • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
  • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
  • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
  • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.