Browse our other
Lab Equipment

Item Details
Item specification details
Property Value
Item Id 418551
Item #: 418551
Item: GE AKTAcrossflow Tangential Flow Filtration System
Model #: AKTAcrossflow
Serial #: N/A
Year Built: N/A
Location: California
Price: $20,000.00
Description

GE AKTAcrossflow Tangential Flow Filtration System 18118000

***AKTAcrossflow was tested as far as we could. We are unable to log on to Unicorn software for this instrument due to licensing issue. Unit is preowned with slight wear from normal use. Buyer can expect a working machine with 30-day warranty. Everything pictured included. See photos for details.

(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)

Includes:
AKTAcrossflow Instrument
Lenovo PC Intel i7 8700CPU @3.2Ghz & 16GB Ram with Unicorn 7.4 software installed & Dell Monitor

KTAcrossflow is a fully automated tangential flow filtration system for process development and is suitable for filter screening and process optimization at small-scale as well as small-scale processing.

Broad range of applications that cover ultrafiltration and microfiltration.
Flexible operation of either hollow fiber filter cartridges or cross flow cassettes.
Thorough and efficient process development with full TMP and flux scouting.
Single, familiar UNICORN interface for both chromatography and tangential flow filtration.
Minimum working volume of 25 mL ensures operation of filters between 40 cm and 150 cm.
Suitable for small-scale processing where limited material is available.

UNICORN control software has the benefits of one common control platform and user interface for all scales of operation in filtration and chromatography. The scouting feature gives automatic support to process development and optimization. Method wizards and pre-programmed methods provide a high degree of efficiency development work. UNICORN is suitable for use in a regulated environment in a manner complying with FDA 21 CFR Part 11.

The system can be used with flat sheet cassettes and hollow fibers. A wide range of cross flow devices include MidGeehollow fiber cross flow cartridges and Kvick Startflat sheet cassettes. The cassettes are available in 40 cm2 and 150 cm2 for ultrafiltration as well as diafiltration process development and require small working volume. The AKTACrossflow comes complete with UV, pH and conductivity detectors as well as air, pressure and temperature sensors. The valves and the fittings are specially developed for hygienic, leak-free operation. Electrically actuated diaphragm valves diminish hold up volumes and prevent dead volumes.

Specifications:
Main Voltage: 100 to 240 V~ 10%, 5060Hz (Auto range)
Weight: 70 kg
Recirculation Volume Min.:25 ml (with 1.7 mm i.d. tubing kit)
Width: 620 mm
Application: Well-suited for process development, filter screening, and process optimization at small scale.
Compliance: The product fulfills valid directives and standards when used within the conditions specified in the user manual. The product must also be used in the same state as it was delivered from GE Healthcare and connected only to other CE labeled GE Healthcare modules or other products as recommended. For regulatory details please see declaration of conformity.
Flow Cell Path Length: 2 mm
Connections: UNF 5/16
Wavelength [Zn Lamp]: 214 nm
Hold-Up Volume Recirculation Line: < 20 ml (with 1.7 mm i.d. tubing kit, empty reservoir)
Length: 400 mm
Operating Pressure Max.: 2 bar (75.4 psi)
Material Compliance: USP Class V
Height: 650 mm
Protection Class: IP 20
Complete Packsize: 1 Piece
pH Range: 2 12
Mixing Principle: Magnetic stirrer

Additional Prep Fees May Apply
Shipping
Item shipping dimensions and specifications
Dimension Measurement
Height: 27.00 in
Width: 50.00 in
Length: 19.00 in
Weight: 150.00 lbs
Prep Fee: N/A
Registered customers can request free US domestic shipping quotes. Quotes take 1-3 business days to process.
Analytics chart icon This item has  today
Sell item icon Have one to sell?
Sell
Need Financing? First Citizens Bank Finance link logo

Testimonials

  • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
  • "The strength of their site is how often our machinery comes up on web searches." - John G.
  • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
  • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
  • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
  • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
  • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
  • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.