THERMO SCIENTIFIC 4328 MaxQ 4000 Large Incubated Orbital Shaker | Lab Equipment
    $4,000.00
    $3,000.00

    We'll submit your offer right away and will let you know as soon as the seller responds

    Want to speak to the seller?
    Call us at 1-847-854-8577

    Did you know?

    • Buy This Now will submit at asking price
      BoE will be in contact within 1 business day.
    • This is NOT a timed auction.
    • BoE highly recommends buyers Contact the Seller to get questions answered prior to placing an offer.

    Item Details

    Item Id 418553
    Item #: 418553
    Item: THERMO SCIENTIFIC 4328 MaxQ 4000 Large Incubated Orbital Shaker
    Model #: 4328
    Serial #: N/A
    Year Built: N/A
    Location: California
    Price: $4,000.00

    Description

    Thermo Scientific MaxQ 4000 Large Incubated Orbital Shaker Model 4328

    ***MaxQ 4000 was tested to specifications. Unit was able to reach 59c on our temperature gauge. Shaker is working. Unit is preowned with slight minimal wear from normal use. 30-day warranty included with purchase. See photos for details.

    (Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)

    Combine the convenience of a benchtop design with orbital shaking technology in one package with Thermo Scientific MaxQ 4000 Benchtop Orbital Shakers. Versatile, incubated and refrigerated, these shakers are ideal for cell culture, solubility studies, extraction procedures, protein expression and many other applications. They are spacious chambers in a footprint designed for the benchtop.

    MaxQ 4000 benchtop orbital shakers are durable and easy to use with a spacious 18 18in. platform for higher vessel capacity. These benchtop units handle up to six 2L flasks. The clear, scratch-resistant lid allows unobstructed sample viewing without disturbing chamber temperature.

    Triple eccentric drive delivers uniform motion with 0.75in. (19mm) circular orbit
    Timed or continuous-run modes
    Clear, scratch-resistant lid for sample viewing
    Safety interlock stops platform when lid is opened
    Precisely monitor temperature and control chamber temperature over complete range with 0.1C accuracy at 37C with PID temperature controller
    Over temperature safety feature with independent thermostat provides additional backup by controlling heat if main temperature controller fails

    Analog Models
    Speed control from 40 to 400rpm by rotary dial
    Integrated tachometer monitors and displays speed in rpm to guarantee an accurate setting
    Easy-to-read LED digital temperature display
    Continuous and timed operation from 1 to 60 min.

    Digital Models
    Variable speed control from 15 to 500 rpm
    View speed, temperature and time simultaneously on three individual LED displays which helps minimize errors in establishing running conditions
    Continuous and timed operation from 0.1 hr. up to 999 hr. or 0.1 min. to 999 min.
    Shaker shutdown and audible/visual alarms signal if unit operates 10% of set speed, preventing shaker from walking
    User-adjustable speed calibration can be performed using a digital handheld tachometer, where verification is required and protocols can be standardized
    Unbalanced load sensor stops platform motion when excess vibration is detected and visual/audible alarms signal until condition is corrected
    Soft-start feature eliminates sudden starts and stops, splashing of vessel contents or wetting of flask closure
    Solid-state DC brushless motor is maintenance free

    For a complete system, order platforms and clamps (sold separately).

    Requires:
    Universal Platform (without clamps) or Dedicated Platform (with pre-installed clamps).

    Recommended for:
    Cell culture
    Solubility studies
    Extraction procedures
    Plasmid purification
    General mixing
    Bacterial suspensions
    Staining and destaining
    Washing procedures
    Hybridizations
    Protein expression

    Specifications
    Orbit: 19 mm
    Speed Range: 15 to 500 rpm, 1 rpm
    Voltage: 120 V
    Holds: 6 x 2 L Flasks
    Load Bearing Capacity (English): 50 lb.
    Temperature Range (English): 50F to 140F
    Temperature Resolution: 0.1C
    Length (English) Platform: 18 in.
    Width (Metric) Platform: 45.7 cm
    Description: Large Incubated Benchtop Orbital Shaker
    Motor Type: DC brushless
    Timer Range: Continuous or timed operation from 0.1 minute to 999 hours
    Load Bearing Capacity (Metric): 22.7 kg
    Electrical Requirements: 120 V, 50/60 Hz
    Temperature Range (Metric): Ambient plus 10C to 60C
    Product Type: Shaker
    Certifications/Compliance: CE, cUL, UL
    Temperature Accuracy: 0.1C
    Frequency: 50/60 Hz
    Length (Metric) Platform: 45.7 cm
    Controller Type: Digital
    Model: MaxQ 4000 Incubated Benchtop Shaker
    No. of Positions: 6

    Additional Prep Fees May Apply

    Shipping

    Height: 22.00 in
    Width: 24.00 in
    Length: 32.00 in
    Weight: 165.00 lbs
    Prep Fee: N/A
    Registered Customers can request shipping quotes free of charge. Shipping Quotes take 1-3 Business Days to Process
    Request Shipping Quote

    charticon This item has  today
    moneyicon Have one to sell?
    Sell
    Need Financing? FinanceLink

    Testimonials

    • "The biggest demand for manufacturers today is to become operational as quickly as possible and Bid on Equipment provides this solution." - Dave M.
    • "The strength of their site is how often our machinery comes up on web searches." - John G.
    • "We appreciate BoE... Always helpful, friendly and very professional." - Ali L.
    • "If you have questions about machinery you're buying they will find someone who can help. Everyone I talk to here is very friendly." - Tim Y.
    • "BoE is a powerful site that has yielded great results for our company. If you need to buy or sell equipment, I recommend this site." - Michael M.
    • "BoE keeps the engine turning and its potential is limitless. They take out the nonsense that you find on auction sites." - George P.
    • "I have sold 2 large Electric Motors through Bid On Equipment. They got them sold within a month!" - Richard B.
    • "The best thing to happen to our company, the personnel are fantastic..." - Ron W.