Eppendorf New Brunswick Incubator Shaker Innova 42R Inc/Ref shaker stackable
**This unit has been tested as far as we could. Unit powers On and Temperature working. Shaker does not function properly(runs slowly for seconds and then stopped). Tilt Alarm ON. See photo for further details.
Stackable, incubated, refrigerated shaker with removable stationary shelf If versatility is what you need, look no further. The Innova 42 and Innova 42R incubator shaker is available with a large list of optional extras, allowing you to customize your shaker to your application. Furthermore, the Innova 42/42R can be stacked in pairs or tucked under a standard lab bench - either way, you'll save space. Static incubation is included via one static shelf which can be used simultaneously whilst the Innova 42/42R is shaking other cultures. It is hard to believe that a typical 6 L flask can be used in this compact shaker.
Recommended applications:
Cultivation of bacteria, yeast, fungi, insect cells, e.g. for protein expression
Cultivation of algae of plant cells (photosynthetic light bank optional)
Plasmid production / Bacterial clone selection on Agar plates
Media optimization
Mixing and shaking of samples (e.g. for staining, washing, extraction or hybridization)
Solubility studies
Lab position flexibility: and small footprint The Innova 42/42R can be positioned on or
under the bench ( 84 cm/ 33 in) either way, you will save space with the small footprint. Parallel static cultivation: One removable, height adjustable, stainless steel shelf above the shaker platform is included; additional shelves are available.Sample desiccation and medium evaporation protection: The optional culture drawer can be used, for example, to protect Agar plates from desiccation to maximize clone viability. Spill protected and easy to clean: The Innova triple-eccentric drive is protected from spills by a covering spill diverter underneath the shaker platform (left).
The spill diverter guides liquids to the drainable spill pan with rounded corners underneath (middle and right, tubing and connector not supplied). The built-in spill pan can also be used as water reservoir to reduce medium evaporation humidity monitoring is optional. Ready for low- to medium-speed applications: Sticky pads on specialized platforms are a clamp alternative for flat bottom vessels and low-speed applications (max. 200/250 rpm at 2/1 in (50/25 mm) orbit). They are re-usable and can be re-positioned simply by peeling it from the surface.
Check your samples: Large, triple-pane, insulated viewing window and an internal light provide a clear view of the chamber contents
Saves lab space and is easy to move: Small footprint of only 63.5 74.5 cm / 25 29.3 in
Smart shaker drive control: Smooth acceleration and deceleration avoid splashing and mechanical damage; for safety, shaker stops, if door is opened or excessive imbalance is detected to prevent the shaker from walking
Ergonomical and safe interface handling: Top mounted controls and display make bending down unnecessary, avoids accidental parameter changes, and can be reached easily even in a double stack
Programming: Continuous, timed, or multi-step programs with up to 15 steps, four programs storable
High capacity in a small footprint: for example, up to 4x 5 L or 2x 6 L Erlenmeyer flasks on universal platform
Durable and corrosion-resistant: Powder-coated, stainless-steel exterior and interior
Specifications
Orbit options- 1.9 or 2.5 cm (0.75 or 1 in)
Platform size- 46 46 cm (18 18 in)
Max. flask size- 6 L
Drive type- Triple-eccentric counterbalanced (three shafts to support weight), nine permanently lubricated ball bearings
Motor type- Solid state brushless DC
Speed range- 25 400 rpm
Speed increment- 1 rpm
Speed accuracy- 1 rpm
Speed deviation alarm (visible & audible) 5 rpm
Temperature range Incubated: ambient + 10 C to 80 C; Refrigerated: ambient -20 C (min. 4 C) to 80 C (max. 70 C with PSlight, 60 C with rH-monitoring).
Temperature increment- 0.1 C
Ambient temperature- 10 35 C
Temperature accuracy- 0.1 C (at 37 C)
Temperature deviation alarm- 1 C (heat turns off to regulate to setpoint, additional independent over-temperature cutoff included)
Power outage behavior- Automatic restart to last setpoints after power is restored, indicated by flashing display
Programming of temperature or speed- Yes (15 steps, 4 programs storable)
User interface- Large LCD display (12.5 x 6.5 cm/ 4.9 x 2.6 in) with display of setpoint and actual values
Logging of chamber temperature, rpm, and alarms, remote parameter and status monitoring, alarm notifications via email or SMS- Yes, via RS-232 interface combined with VisioNize Lab Suite (VisioNize box required for Innova 42/42RHumidity monitor
Power Electric- 120V, 60Hz
Additional Prep Fees May Apply
