Perform basic ion analysis reliably. The Thermo Scientific Dionex Aquion IC system is a simple, compact platform with straightforward operation for labs. This basic IC system features dual-piston pumping, electrolytic suppression, high sensitivity and set-and-forget convenience. Enjoy ease of use, fast start up times and reliable, stable performance for demanding applications in environmental, food safety, and academic laboratories.
Manufacture Specification
Type:
Serial dual-reciprocating pistons, microprocessor-controlled constant stroke, variable speed
Construction:
Chemically inert, metal-free PEEK pump heads and flow paths compatible with aqueous eluents of pH 014 and reversed-phase solvents
Pump Operating Pressure:
035 MPa (05000 psi)
Flow Rate Range:
0.005.00 mL/min without changing pump heads
Flow Precision:
<0.1%, typically
Flow Accuracy:
<0.1%, typically
Pressure Ripple:
<1% at 13.8 MPa (2000 psi) and 1.0 mL/min
Eluent On-Off Valve:
Standard
Piston Seal Wash:
Dual-pump head, wash can be continuous when connected to rinse solution supply
Pressure Alarm Limits:
Upper limit 035 MPa or 05000 psi in one unit (MPa or psi) increments; lower limit can be set up to one unit lower than upper limit
Vacuum Degas:
Yes, optional, automatic control
Eluent Bottles:
Polypropylene, up to 4 L volume
Eluent Bottle Pressure:
Not required
Injection Valve:
6-port, 2-position Rheodyne valve, electrically activated
Columns Supported:
2, 3, 4, and 5 mm i.d.; maximum length 250 mm analytical column with 50 mm guard column
Additional Prep Fees May Apply
