Teledyne ISCO Combi Flash RF 200 Automated Flash Chromatography System
** Unit has been tested as far as we could. Unit is missing the bottom trays and tubing in the fraction collector arm. Unit was powered on and sent through testing as far as we could with the materials present on the unit. Unit has some signs of cosmetic wear on the base of the unit as well as on the sides of the unit... please see photos for more details.
Space saving design is smaller than other flash chromatography systems on the market, freeing scarce hood space for other uses.
Solvent and waste management prevents columns from drying and waste containers from hazardous overflows.
Large touch screen 10.4 inch (26.4 cm) puts the most used controls on a single, easy to read display.
RFID (Radio Frequency Identification) identifies columns and loads the appropriate method for the best separation. With reusable bonded-phase columns, the system tracks the number of runs on the column as well as the last solvent used, so you know whether you need to flush the column.
RFID identification of fraction collection racks sets the maximum fraction size to prevent overflows.
No waiting to access data - networking lets you connect to the Combi Flash Rf+ to monitor and remotely control your experiment, analyze data, and print to network printers.
Rapid column air purge prevents solvent from being discarded with the used column. It is better for the environment, safer in the lab, and eliminates messy column removal.
TLC Rf to Gradient calculator determines optimal separation parameters while minimizing run time.
Easy scale-up with built-in method-scaling means you won't need to re-develop your method. You save time when you increase reaction size. You can even scale up to a 3 kg column run on a Combi Flash Torrent.
Back pressures to 200 psi for improved separations.
Flow Rate Range: 1 - 200 mL/min
Maximum Pressure: 200 psi (14 bar)
Detection UV (UV-Vis optional) + ELSD
Spray Chamber Temperature Ambient to 120 C
Drift Tube Temperature: 10 - 70 C
Gas Requirements: 65 psi (4.6 BAR) 5 psi (0.3 BAR) Nitrogen or other inert gas
Dimensions (H x W x D): 24 x 14.1 x 17 in (61.0 x 35.8 x 43.2 cm)
Additional Prep Fees May Apply
