Thermo Scientific TSQ Endura Triple-Stage Quadrupole Mass Spectrometer - FOR PARTS
***This unit is for sale AS/IS. (Unable to power on TSQ Endura). Only what is picture d included. See photos for further details.
The Thermo Scientific TSQ Endura triple-stage quadrupole mass spectrometer provides unparalleled value, with LODs and LOQs unrivaled in its class. It delivers this best-in-class quantitation run after run and day after day, even for complex and difficult-to-run samples. Close integration with application-specific software ensures maximum productivity. The instrument's excellent analytical performance doesn't come at the price of complexity or lack of durability; breakthrough software and hardware developments make operation far easier and more reliable than in previous-generation triple quadrupoles. The TSQ Endura MS helps users spend more time thinking about their analyses and less time worrying about instrument setup and operation.
Extreme quantitative value in a triple quadrupole mass spectrometer
Best-in-class sensitivity
Ultrafast selected-reaction monitoring enables quantification of more compounds in less time
Superb robustness and reliability
Close integration with application-specific software ensures maximum productivity
Simple method development and easy operation
Hardware Features
Thermo Scientific EASY-Max NG API Source
Automatic connection of all gases and voltages on installation for simpler operation and greater reliability
Automatic source recognition for ease of use and simplified data logging
Sweep gas reduces chemical noise
Enhanced exhaust port efficiently removes solvent vapor, improving uptime and reducing chemical noise
Optimal 60 degree spray angle
Minimal adjustment
Interchangeable HESI and APCI ionization probes
Dual-mode HESI and APCI capability
Ion Optics
RF-Lens
The progressively spaced stacked-ring ion guide (RF-Lens) captures and efficiently focuses ions in a tight beam. Large variable spacing between electrodes provides better pumping efficiency and improved ruggedness. Automatic tuning program optimizes ion transmission.
Ion Beam Guide
The ion beam guide, with its neutral blocker, stops neutrals and high-velocity clusters, keeping the ion optics cleaner, reducing noise, and increasing sensitivity.
Hyperbolic Quadrupole Mass Filter
(Q1 and Q3)
Hyperbolic quadrupoles with high ion transmission at isolation widths down to 0.4 amu provide excellent sensitivity and selectivity.
Active Collision Cell (Q2)
The high-pressure argon-filled collision cell produces efficient fragmentation for high sensitivity. An axial DC field speeds ion transits, yielding up to 500 SRM/s with zero cross talk.
Vacuum System
Four-stage differentially pumped vacuum manifold
Advanced triple-inlet turbomolecular pump integrated with the vacuum manifold
Single rotary vacuum pump configuration
Detector
Dual-mode discrete-dynode detector increases sensitivity by operating in pulse-counting mode when ion flux is low and analog mode when ion flux is high
Six orders of dynamic range provide high-confidence quantitation
Integrated Divert Valve and Syringe Pump
Fully automated data system control of the divert valve enables switching the solvent front, gradient end point, or any portion of the HPLC run to waste.
Optional Ion Sources
Thermo Scientific Ion Max NG ion source provides ultimate performance with full adjustments for optimization
Thermo Scientific EASY-Spray NG ion source is designed for maximum nanoelectrospray performance with no need for adjustments
Thermo Scientific Nanospray Flex NG ion source is designed for ultimate nanoelectrospray performance with complete flexibility of column selection
Installation Requirements
Power
Three 230 Vac 10%, 50/60 Hz at 16 A minimum
Four 120 Vac +610%, 50/60 Hz at 20 A or four 230 Vac 10%, 50/60 Hz at 13 A
Earth ground hardwired to main panel
Free from voltage variations above or below the recommended operating range
Gas
Collision gas: 99.995% pure argon
Collision gas supply pressure: 135 70 kPa (20 10 psig)
Sheath/aux/sweep gas: 99% pure nitrogen
Sheath/aux/sweep gas supply pressure: 690 140 kPa (100 20 psig)
Maximum sheath gas consumption: 20 L/min
Environment
Functional temperature range: 1527 C (5981 F)
Optimal temperature range: 1821 C (6570 F)
Heat output: 1550 W (5400 Btu/h)
Total system heat output: 4420 W (15,380 Btu/h)
Particulate matter: <3,500,000 particles per cubic meter of air (<100,000 particles of >5 m diameter per cubic foot of air)
Relative humidity: 20% to 80%, without condensation
Floors must be free of vibration
Dimensions
Size
TSQ Endura MS1 : 680 760 840 mm (h, w, d 27 30 33 in)
Oerlikon SV 65 forepump: 270 320 489 mm (h, w, d 10 13 19 in)
Weight
TSQ Endura MS: 125 kg (275 lb)
Additional Prep Fees May Apply
