Thermo Dionex UltiMate 3000 TXRS Open Autosampler w/ Pump & Column Compartment
***Unit is preowned with minimal wear from normal use. All units power on without errors, autosampler initializes upon startup. System will need to be validated/calibrated to ensure accurate results. Buyer can expect everything pictured working 100% with a 30-day warranty. See photos for details.
(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)
Includes:
OAS-3300TXRS Open AutoSampler P/N 5485.0010
TCC-3000RS Column Compartment P/N 5730.0000
LPG-3400XRS Pump P/N 5043.0036
The OAS-3300TXRS Open Autosampler is an XYZ robotic system offering high flexibility and functionality. The autosampler provides straightforward automation and sample handling in analytical UHPLC (ultra-high performance liquid chromatography) and mass spectrometry applications, especially as part of the UltiMate 3000 system. However, the instrument can also be used with other HPLC systems, if adequate control inputs and outputs are available.
The autosampler is controlled by the Chromeleon Chromatography Management System.
Being part of the UltiMate 3000 system, the autosampler can also be operated with other data systems, such as Analyst, Compass/ HyStar, or Xcalibur To do so, installation of the DCMSLink (Dionex Chromatography Mass Spectrometry Link) software is required in addition to the installation of the data system.
Empower
To do so, installation of the Dionex Instrument Integration software is required in addition to the installation of the data system.
Operate at temperatures up to 110C with no compromise in precision or accuracy. The Thermo Scientific Dionex UltiMate TCC-3000RS Rapid Separation Thermostatted Column Compartment enables the use of high column temperatures for ultrafast and conventional liquid chromatography (LC) applications to reduce system backpressures and run times. Dispersion-reduced precolumn heating and postcolumn cooling technology ensure optimal separation, run time, and detection under challenging conditions. These low-volume cooling and heating components can be easily exchanged to optimally match column flow and mobile phase requirements.
The TCC-3000RS Rapid Separation Thermostatted Column Compartment allows automated method development and column scouting to optimize column selection and other parameters. For existing methods, accurate and precise control of temperature from 5110C ensures consistent retention times, even as the ambient temperature changes. It is easily field-upgraded with up to two integrated column switching valves, providing access to advanced column switching techniques and two-dimensional LC (2D-LC) to increase productivity and performance. The high temperature range of this compartment expands the options for future methods.
Features
Optional column switching valves in stainless steel and PEEK support up to 125 MPa (1250 bar, 18,130 psi)
Install precolumn heater and postcolumn coolers quickly and easily
Postcolumn cooling minimizes detector noise and drift in ultrafast LC applications
Fast heat up/cool down times minimize delays when changing methods
Access to x2 dual technology increases productivity
The TCC-3000RS is highly flexible and supports up to 12 LC columns (depending on column dimensions) to a length of up to 30cm. A column identification system simplifies audit trails and troubleshooting. It supports up to four columns, saving information such as column ID, geometry, media, number of injections, and more
Description
TCC-3000 RS Rapid Separation Thermostatted Column Compartment
For Use With (Equipment)
UltiMate 3000 RS Series
Type
Rapid Separation Thermostatted Column Compartment
Voltage
150 V
Recommended Eluent Preheater Volume
2 L
GLP Features
Dionex AutoQ routines for Instrument QualificationColumn Identification System for four columns
I/O Interfaces
2 digital inputs, 2 programmable relay outputs
Cool-Down Time
15 min.
Max. Column Length
30 cm
Heat Up Time
15 min.
Column Capacity
Up to 12 columns, depending on column length; Max. column length: 30 cm
Max. No. of Switching Valves
Up to 2 Valves: 2-position/6- or 10-port, 6-position/7-port
Biocompatible Version
Yes
PC Connection
USB
Temperature Accuracy
0.5C
Temperature Range
5C to 110C
Weight (Metric)
12.9 kg
Unit Size
Each
For the highest degree of flexibility with solvent proportioning in UHPLC or conventional LC, the Thermo Scientific Dionex UltiMate LPG-3400RS Rapid Separation Quaternary Pump supports ternary and quaternary gradients over an industry-leading flow-pressure footprint. It supports the use of up to four solvents at up to 15,000 psi (100 MPa) and a recommended flow rate range from 200L to 8.0mL/min. with excellent flow stability. This pump adapts easily to multiple fast routine applications or method development in the pharmaceutical, food and beverage and environmental industries.
Recommended Use
The LPG-3400RS provides the highest degree of flexibility in solvent proportioning for UHPLC applications. This pump is recommended for a wide range of research and routine applications, and for method development. For higher-pressure separation needs, choose the LPG-3400XRS pump. For routine applications requiring up to 62 MPa (9,000 psi, 620 bar), choose the LPG-3400SD pump.
Simple Method Transfer
UltiMate 3000 Standard (SD) and RS pumps and system configurations provide similar gradient delay and extra-column volumes. This simplifies the method transfer between method development labs commonly using UHPLC pumps and QC and production labs with their standard LC pump configurations.
Features
Serial dual-piston operating principle, low-pressure gradient proportioning
Wide operating flow rate range from 200L to 8mL/min. with high flow rate accuracy
Support of operating pressures of up to 100MPa (15,000 psi/1000 bar)
Thermo Scientific SmartFlow technology to automatically compensates for compressibility; no manual solvent setting needed
Large selection of Thermo Scientific SpinFlow mixing volumes perfectly balance gradient delay volume with mixing efficiency
Reliable vacuum degassing with an internal four-channel micromembrane degasser
Active rear-seal wash to maximize seal lifetime and instrument uptime
Description LPG-3400 RS Quaternary RS Pump
Biocompatible Version Yes
Flow Accuracy 0.1%
Flow Precision <0.05% RSD or <0.01 min SD, whichever is greater
Gradient Formation Low-Pressure Proportioning
Max. Flow Rate 8 mL/min.
Pressure Range 2 to 103.4 MPa up to 5 mL/min; 2 to 80 MPa up to 8 mL/min
Type Serial Dual-Piston Quaternary Rapid Separation Pump
Emission Sound Pressure Level <70 dB(A) in 1-m-distance
For Use With (Equipment) 15-Pin D-Sub Connector for Solvent Rack/Degasser Connection
GLP Features Full support of Thermo Scientific Dionex AutoQ instrument qualification, qualification status and system wellness monitoring. All system parameters are logged in the Chromeleon Audit Trail.
Gradient Delay Volume 325-1840 L (Depending on the SpinFlow mixer configuration)Default: 690 L
I/O Interfaces 2 digital inputs, 2 relay outputs
Min. Flow Rate 0.001 mL/min. (Recommended: 0.1 mL/min.)
No. of Eluent Lines 4
Operating Principle Serial dual-piston
PC Connection USB for PC connection, USB hub with 3 sockets integrated
Pressure RippleTypically: <0.2 MPa or <1% whichever is greater
Proportioning Accuracy 0.5% (full scale)
Proportioning Precision <0.15% SD
Solvent Degassing Built-in, 4 channels
Overall Width (English) 16.5 in.
Overall Width (Metric) 42 cm
Overall Height (English) 6.3 in.
Overall Height (Metric) 16 cm
Overall Depth (English) 20 in.
Overall Depth (Metric) 51 cm
Weight (English) 29.8 lb.
Weight (Metric) 13.5 kg
Voltage 100-120 V, 60 Hz; 200-240 V, 50 Hz
Frequency 100-120 V, 60 Hz; 200-240 V, 50 Hz
Unit Size Each
Additional Prep Fees May Apply
