Spectronic Genesys 5 UV/Visible Spectrophotometer CAT# 336001
***Preowned instrument was tested to specifications. Performance validation, wavelength accuracy all passed. Unit has slight wear from normal use. Everything pictured included. 30-day warranty included with purchase. See photos for details.
(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)
The Spectronic Genesys 5 UV/Visible Spectrophotometer is an easy-to-use, UV-Visible wavelength spectrophotometer designed for quantitative measurements in:
Industrial quality control and research laboratories, including food and beverage, chemical and pharmaceutical applications
Academic research and teaching laboratories
Environmental laboratories, including water and wastewater applications
The GENESYS5 spectrophotometer performs absorbance, % transmittance and concentration measurements within the wavelength range of 200 to 1100 nanometers. The instrument offers:
Control and operation of all accessories
Microprocessor-controlled 8-Position Multi-Cell Holder for increased productivity
Automatic wavelength calibration on power-up to ensure the instrument is operating properly
Split-beam optical system for stable measurements
The GENESYS 5:
Accepts Application and Memory SoftCards for running applications programs and manipulating data
Supports external devices, such as a printer, plotter or computer
Automatically prints data to the internal printer or to an external printer
TheGENESYS 5 offers the following standard features:
Graphic LCD (40 columns x 16 lines, backlit) display for easy data plotting, test set-up and instrument status information; monochrome display
Tactile keyboard with audible response so you know when a key has been completely pressed
Two card slots for SoftCards (Application and Memory) to increase the test and storage capability of the instrument
Built-in RS232C and Centronics-compatible ports to support a wide range of output devices
Operating environment (following a 30-minute warm-up period):
Ambient temperature: 50F - 75F Relative humidity: 20% - 80%
Ambient temperature: 75F - 85F Relative humidity: 20% - 70%
Ambient temperature: 85F - 95F Relative humidity: 20% - 60%
Ambient temperature: 95F - 105F Relative humidity: 20% - 50%
Storage environment:
40F to 140F (-40C to 60C) - Relative humidity not to exceed 60%. Allow instrument to adjust to room temperature for 24 hours after taking it out of storage.
Temperature should be maintained at 4F. Relative humidity should be maintained to 5%.
Specifications:
Power: 115V 60 Hz, 2.2 Amp
Spectral slit width: 5nm
Optical system: Split-beam, dual detectors
Display: Graphic, backlit monochrome LCD
Scan Speeds: 300nm min (1pt/ nm), or 900nm/min (1pt/3nm)
Slew Speed 27,000nm/min (across full wavelength range)
Standard Interfaces: RS232C serial and parallel printer ports
Dimensions 18.9 W x 22.3 D x 8.3 H (47.9 x 55.5 x 21.0 cm)
Weight: 27 lbs (12.3 kg)
Altitude: From below sea level to 2000 meters (6562 feet)
Additional Prep Fees May Apply
