Jasco FP-8500 FDP Spectrofluorometer w/ Water Cooled Peltier Thermostatted Cell Holder
***Instrument was tested for basic power function only. We don't have the software to fully test this unit. FP-8500 is preowned with slight wear from normal use, (chipped paint on back panel.) 30-day warranty included with purchase. See photos for details.
(Please be advised that any warranty/guarantee/return policy provided from the seller is between the buyer and the seller only. Bid on Equipment is not and cannot be held responsible in any way. Please reference our Terms and Conditions for further information.)
The FP-8500 Spectrofluorometer is a high performance spectrofluorometer with an optimized optical design for very low stray light and a dynamic range of up to 6.5 orders of magnitude. It is exceptionally sensitive with a Raman S/N ratio of 5,000:1 (RMS), which allows for fast measurements of samples with low level fluorescence. The high spectral resolution of 1.0 nm, automatic band-pass filters for exclusion of higher-order diffraction, and accurate spectral correction assures accurate measurements for the evaluation of advanced materials. The high-speed scanning enables fast measurements of 3D spectra and phosphorescence samples.
The FP-8500 optical bench has been developed to take advantage of the wide range of sampling accessories and applications, such as temperature-dependence, anisotropy, FRET, spectral correction, and quantum yields.
Features
High sensitivity S/N 75,000:1 (RMS, water Ramen)
High-speed scanning up to 60,000 nm/min
Wavelength range: 200 to 750 nm (850 nm optional)
Validation accessory comes standard
Advanced Features of the FP-8000 Series
High throughput optical system
Highest S/N performance
Wide dynamic range (at least 6 orders of magnitude)
Auto Gain and Auto Sensitivity Control System
Automatic cut-off filters for higher-order diffraction
High speed scanning
Advanced digital signal processing
Spectral Correction
Spectral bandwidth down to 1 nm
Unique Features and Accessories
Compact benchtop design
Range of precise temperature control accessories
Automatic polarizers to allow for automatic anisotropy measurements
Quantum Yield Determination
Automated Microplate Reader for rapid sample throughput
Microsampling accessories for small volume samples
Stopped-flow system allows for kinetic measurements
Spectra Manager software for control and data analysis
Flexible design allows for field upgrades as measurement requirements change
Versatility for a Wide Range of Applications
Protein dynamics
Quantitative analysis
Cellular membrane studies
Enzyme kinetics
Carbon nanostructures
Fluorescent materials
Short lifetime phosphorescence measurements
Options
Automatic polarizers
Temperature control
Stopped flow
Integrating spheres
Microplate Reader
ETC-815 | Water-Cooled Peltier Thermostatted Cell Holder with Stirrer
Compatible Cells Micro cell: 3x3 or 5x5 mm, Rectangular cell: 10x10 mm, 1 pc
Temperature Control System Heating/cooling system utilizing Peltier effect
Peltier Heat Radiation Water cooled
Stirring System Integrated variable speed magnetic stirrer
Temperature Setting Range -10 to 110 C
Temperature Control Range 0 to 100 C (20 C water temperature)
Temperature Control Accuracy 0.1 C
Temperature Accuracy With cell holder sensor: 0.5 C (20 to 40 C), 1 C (<20 C and >40 C) With in-cell sensor: 0.2 C
Standard Accessory In-cell sensor
EX2-755 Computer Liquid Cooling System,
EX2-755 is an ambient liquid cooling system designed with features for computer cooling. This model contains a dual x 120mm fan aluminum radiator, providing roughly 590W of cooling with a 25C ambient delta. Just add tubing, fittings, coolant, and connect to your cold plate(s).
Cooling capacity: 590W (2013BTU/hr) with 25C liquid-ambient delta @ 6LPM
Radiator fan speed: automatic based on temperature, or 10 manual levels
Pump: 10 manual speed levels, up to 6LPM (1.6GPM)
Adjust audio alarm based on 3 included temperature sensors
Relay trigger can be configured as NO or NC and adjusted based on temperature
Power input: 12VDC (via computer Molex plug), or 110/220VAC with separate adapter
Reservoir capacity: 157ml (5.3 fl oz)
G 1/4 BSPP threads on back for fittings
Additional Prep Fees May Apply
