Forming fabric include: Single layer forming wire, Double layer forming wire, 2.5 layer forming wire, SSB forming fabric, Cresent Former Forming Fabric
With many years of experience in production single layer forming fabric, we can supply a wide range of single layer forming fabric. single layer forming fabric can meet many applications, if you need, please get our online timely service about single layer forming fabric. In addition to the product list below, you can also customize your own unique single layer forming fabric according to your specific needs.
The 4-Shaft design single layer forming fabric commonly used in manufacturing all varities of paper grades. Four Shed Design Mesh available from 16/cm to 30/cm. Can be supplied in various combinations of warp (MD) yarns and welt (CD) yarn diameters. Specially suitable for writing printing papers where empahsis is on the formation of paper and also in coarseness. It is widely used in Liner Board, Pulp Board etc.
The 5-Shed design single layer forming fabric available from 22/cm to 30/cm Can be supplied in various combinations of warp (MD) yarns and weft (CD) yarns diameters Suitable for all type of paper grades where emphasis is on life of forming fabrics. Can be Supplied warp(MD) runner for tissue machines.
The 8-Shaft design single layer forming fabric (two up six down) has more internal void volume, more drainage capacity. 8-shed single layer forming fabric is suitable for making high basis weight paper and packing papers.
Single layer forming fabric benefits include: High Open Areas for Fast Dewatering Performance, Cleaner Headbox Operation, reduce wear on Dewatering Element and Improved Sheet Formation, Better Mechanical Retention Leading to Higher FSI, High Wear Volumes Ensuring Excellent Fabric Life, Outstanding Fabric Stability, Good Guiding Stability on Demanding Applications.
Polyester synthetic forming fabric is a commonly used filter mesh in the forming section of paper machine, the forming wire can be divided into 1 layer, 1.5 layer, double layer, 2.5 layer, and triple layer forming fabric, in order to increase the work life of the polyester forming fabric, Huatao weaves the nylon monofilament with better abrasion resistance in the weft, which makes the fabrics life longer and reduces the cost.
The 1.5 layer forming fabric is actually a 5-shed single layer forming fabric that have modified to have extra yarns which provides it the same properties as that of a double layer one. 1.5 layer forming fabric is easy to clean, increase sheet release as well as retention and with the extra fabric provides an excellent drainage.
The ideal 1.5 layer forming fabric for most paperboard and packaging grades applications, especially where a smooth top surface and long life potential are desired. In addition, Clean mesh yarn technology provides maximum resistance to premature fabric contamination.
Polyester 2.5 layer forming fabric are also known as support shute double layer forming fabric or double layer extra designs. It's a standard double layer design with an extra shute yarn added on the forming side between the 2 regular cross direction yarns. This yarn increase the pulp fibre support and meanwhile create a more open structure as the amount of wear side yarns is reduced, compared with the forming side.
2.5 layer forming fabric's weaving effect greatly increases the fiber support index due to the addition of a fine weave at the top. The ratio of the top and bottom wefts is 2:1. It suitable for paperboard, newsprint, writing paper, tissue paper, printing paper, kraft paper.
The SSB 3 layer forming fabric or "wire" of a paper machine is the continuous belt or belts of mesh screen upon which the paper sheet is formed. Most modern SSB 3 layer forming fabric are comprised of polyester monofilament. The weave pattern and layering of a SSB 3 layer forming fabric is designed to meet stringent requirements of dimensional stability, resistance to abrasion (on the wire side), minimum resistance to drainage, minimum wire-mark, and (sometimes) maximization of retention of fiber fines.
SSB 3 layer forming fabric woven using 24 harness technology, which allows 6 shaft machine side construction to promote improved life potential. Available with 2 or 3 shaft paper side construction and 3:2, 2:1 or 1:1 weft ratio. Excellent raw material is used to further improve life potential and reduce power consumption. SSB 3 layer forming fabric family has options in 56, 36, 42, 60 styles depending upon application or paper grade. The 56 design benefits from high modules machine direction yarns which promote high FSI without compromise to dimensional stability. Huatao's SSB 3 layer forming fabric should be available to all former types.
SSB 3 layer forming fabric style 36 is a medium coarse weft-bound forming fabric that is used on board and packaging paper machines. The wire design especially features excellent formation, drainage and fabric stability.
Style 36 is an SSB 3 layer forming fabric that is especially suitable for demanding light-weight board and packaging applications which have to meet high paper quality requirements. Due to the unique warp concept of the style, a fine paper side can be combined with an extremely stable machine side. This unique fabric design leads to optimized fabric surfaces for improved paper quality.
The benefits include: High Open Areas for Fast Dewatering Performance, Cleaner Headbox Operation, reduce wear on dewatering element and Improved Sheet Formation, Better Mechanical Retention Leading to Higher FSI, High Wear Volumes Ensuring Excellent Fabric Life, Outstanding Fabric Stability, Good Guiding Stability on Demanding Applications.
Additional Prep Fees May Apply
