Environmental Corrosion Chamber
Salt Spray Test Chamber
NEW, Never Used. SURPLUS TO OUR OPERATION
Equipment Location: Ontario, Canada
The Environmental Corrosion Chamber, Salt Spray Tester, also known as a Salt Fog Tester, is used to test various substrates such as coatings, electroplating, anodizing, metals, electronic components, rust-proofing oils, etc. for controlled accelerated corrosion resistance and susceptibility to rusting or corrosion. It is also suitable for neutral salt spray tests (NSS) and acidic corrosion experiments (AASS, CASS)
Standard: ASTM B-117
Specifications:
Inside Chamber Dimensions: 90x60x50cm
Outside Chamber Dimensions: 140x88x128cm
Test Chamber volume: 270L
Brine tank: 25L
Temperature Accuracy: +/- 1°C
Temperature of test chamber: Brine Test (NSS ACSS) 35°C
Corrosion Resistance Test (CASS) 50°C
Temperature of pressure barrel: Brine Test 47°C
Corrosion Resistance 63°C
Temperature Range: Can be arbitrarily set
Brine Concentration: 5% sodium chloride solution concentration. Add copper chloride 0.26 g/L to the solution. (CuCl2 2H2O)
Power: 120V AC 60Cy @ 15A
Compressed Air Pressure: 1.00 +/- 0.01 kg/cm2
Spray Volume: 1.0~2.0ml/80cm2/h (16 hr average)
Relative Temperature of Test: Above 85%
pH Value: 6.5~7.2 3.0~3.2
Spray: Continuous or Intermittent.
Chamber Seal: Water Dam
Requirements: Compressed Air, 110V AC 60Hz, Water, Drain.
Instructions: Instruction Book Included
Packaging: Original Pallet/Crate
Click link for manual of similar unit. (The unit is the same except that it is the American model with 110 VAC, 60 CPS, not 220 VAC, 50 CPS.)
Additional Prep Fees May Apply
