MARK-10 Chatillon DFS2-250G Force Measurement Test Stand ES10
**This unit has been tested to specifications. Has slight cosmetic blemishes from normal use. See pictures for further details.
This compact, easy-to-use force gauge is designed for basic and complex applications. Ideal for handheld or test stand applications, the DFS II with point adapter. Measurement accuracy is better than 0.1% full scale in integral load cell or dedicated remote models. A large, easy-to-read, high resolution, full color dot matrix LCD display supports a variety of standard gauge functions including normal and peak readings, high/low limits, setpoints, pass/fail results, statistical results, load averaging, load comparisons, % and sharp break detection, loadcell actuation and direction. Loads are displayed in ozf, gf, lbf, kgf and N units. The DFS II Series supplies you with comprehensive results that are easy to view and understand.
The gauge displays:
Measured Result with Units
Operating Mode
Pass-Fail Result
High and Low Load Results
Saved Results
Statistical Calculations; Average with MIN and MAX Results, Cv with Average and Standard Deviation, % Differentiation between Successive Results, Standard Deviation, Graphical representation of saved results.
Break detection is provided and two types of breaks are supported. A sharp break can be used to detect whenever the load measurement drops 5% from a peak load. Alternatively, you may override the sharp break and setup the gauge with a % break detector. The % break detector allows you to set the drop percentage that is used to define a break. This type of break is useful samples with high elastic characteristics.
Specifications
lb f0.5 x 0.0001
kg f1 x 0.0001
N 2.5 x 0.0005
gf 250 x 0.05
ozf 8 x 0.002
Accuracy +0.1% of Full Scale - Non dedicate remote cells and torque sensors are 0.25% and 0.3%
Maximum Overload 150% of Rated Capacity
Tare Capacit y10% of Rated Capacity
Resolution 10,000:1
Peak Capture Rate 10,000 Hz
Data Sampling 10 KHz
Display Update Rate 10 Hz
Data Save Up to 100 Results
Power Battery (Nickel Metal Hydride) or direct AC 120/230Vac
Battery Life With Dimming ON and Bluetooth OFF: 20 Hours
With dimming OFF and Bluetooth OFF: 16 Hours
With dimming ON and Bluetooth ON: 16 Hours
With dimming OFF and Bluetooth ON: 12 Hours
Operating Temperature 440F to 110F (5C to 45C)
Outputs Bluetooth, RS232, USB and +2V analog output
Multiple Language Interfaces, English, Spanish, French, German, Portuguese and Chinese
Additional Prep Fees May Apply