Food grade, 304 stainless steel. 5,500 lb working capacity. 3/16in thick flighting spaced every 18in. Fully enclosed housing measuring 14ft-6in in length. 3ft-6in of open screw (no cover). 1in dia. Steam ports in bottom of trough to directly inject steam. 3in dia. Steam header mounted below trough. Unit mounted on four Weightronics load cells. One 10in square outlet on drive end. One 4in dia. Port in trough. Screw rotate in opposite directions to mix material and convey to both outlets. 10in x 13in inlet in cover. 3in dia. Stainless steel shafting. 10 HP Leeson motor, 1180 rpm, 208-230/460 volt, 256t frame. SM-Cyclo in-line gear reducer, 17:1 ratio. Complete with chain drive and guards. 1/2 HP motor, 1725 rpm, 230/460 volt drive to operate rotating cleaning system. Originally hydro tested at 25 psi. Manufactured by Alpo. Drawings on file.
Additional Prep Fees May Apply.